Resincoat Heavy Duty Anti-Slip Ramp Paint

Model

Condition New

Resincoat Heavy Duty Anti-Slip Ramp Paint is a high strength two-coat system designed to provide long lasting slip resistance to ramps and walkways. This coating is perfect for regular pedestrian traffic but also wheeled traffic, making it a great choice for wheelchair accessibility ramps. Manufactured in the UK the paint boasts a long lasting professional finish.

High quality epoxy resin
Choice of anti slip profiles
Highly durable design
Choice of colours
Easy to apply with limited dripping

More details

Write a review

Data sheet

Size	1kg, 2.5kg, 5kg or 10kg
Appearance	Graded gloss finish
Composition	Epoxy of medium viscosity combined with abrasion resistant fine filler and graded quartz
Durability	Heavy Duty Paint
Thickness	Approx. 0.5mm-1.3mm
Substrates	Concrete, grano, metals and asphalts etc
Drying Time	16 hrs
Coverage	1kg: Approx. 4m² 2.5kg: Approx 8 - 10m² 5kg: Approx 20m² 10kg: Approx 40m²

More info

Resincoat anti slip ramp paint is generally applied onto ramps and walkways in areas vulnerable to slips and trips. This paint is commonly used to provide an anti-slip finish on commercial, domestic and industrial walkways and ramps, inside or outside. Our product can help you create a safe workplace environment and is a great way for you to conform to health & safety regulations. Unlike many other non-slip floor paints, our formula works well even when applied onto vertical risers or edge surfaces with limited dripping. The highly durable design can withstand heavy wheeled traffic making it ideal for use in high traffic areas in factories or walkways.

Our anti slip formula boasts high quality epoxy resin free of solvents and diluents. The coating is available in a wide range of striking colours allowing you to select one that will blend seamlessly into your environment. Customers have a choice of fine, medium & coarse anti slip profiles with each offering good anti slip properties.

Coverage Rates:

1kg - approx. 4m²
2.5kg - approx. 8-10m²
5kg - approx. 20m²
10kg - approx. 40m²

Application Guide:

Preparation –
Ensure your surface is clean and free from any dust or contaminations before applying this product.

Application -
1.   Pour 100% content of your part B in to your part A
2.   Mix components together with a drill & paddle for 1 minute
3.   Apply first coat with a good quality epoxy roller and brush
4.   Scatter the non slip additive by hand into the wet coat
5.   Seal the additive with the second coat
6.   Once complete wash equipment in warm soapy water

*Please note coverage on the top coat may be slightly less than what you are able to cover with your base coat due to the anti-slip additive