Antibacterial MRSA Resistant Anti Slip Floor Paint

What is an antimicrobial?

Independently tested our antimicrobial floor paint offers effective and trusted antibacterial protection ensuring your flooring remains hygienic at all times. With the added anti slip profile this coating is great for areas such as factories, hospitals, doctors surgeries and anywhere else that requires protection. An antibacterial coating specifically prevents the growth of bacteria whilst our antimicrobial coating goes further than this destroying bacteria as well as a wide range of microbes such as fungi and mould. The coating is also resistant to antibiotic – resistant bacteria such as MRSA & VRE.

Long lasting antimicrobial anti slip floor paint

Our coating provides 24-hour protection against most harmful microbes for the lifetime of the product. Additionally it is specifically formulated to meet and in many cases exceed guidelines set about by the Health and Safety Executive in the UK providing excellent anti slip resistance ensuring your surfaces always remain safe. We proudly manufacture our epoxy in the UK guaranteeing high quality performance. Incredibly durable the coating boasts a long lasting, smooth high gloss finish.

Coverage rates:

Please see below for coverage rates.
1kg: 3-4m2
2.5kg: 8-10m2
5kg: 17 – 20m2
10kg: 35-40m2

How does Resincoat antimicrobial floor paint kill bacteria?

The below diagram demonstrates how the antibacterial technology prevents the growth of bacteria on a floor coated with Resincoat antimicrobial floor paint.

Application Guide

Preparation
Before applying this product we advise your surface be free of any dust, dirt or contaminants. A primer may be required, please call our expert team if you require further assistance on specific flooring requirements.

Application
1. Pour 100% content of part B in to part A (Part C, your anti slip additive, will be added later)
2. Mix resin components together with a drill and paddle for 1 minute
3. Pour content in to a paint scuttle
4. Immediately begin applying your paint with an epoxy roller frame and sleeve
5. Scatter your anti slip additive as you go. Be sure to back-roll with the wet roller as your sand is scattered to fully encapsulate it in the coating
6. Once coat one has been applied leave 12-24 then apply second coat
7. Once complete wash equipment in warm soapy water

PLEASE NOTE: The pot life of this product is 20 minutes. This means the paint will start to chemically cure after this time. Ensure you remove the paint from the tin in this window. The paint will then be workable on your floor for 40 minutes. 

Pot life = Time to harden in pot following addition of hardener
Working Time = Time to apply product before becoming unworkable