Resincoat MRSA Primer OP has been specifcally designed to ensure maximum bacterial control is achieved under stringent hygiene management areas. The Primer is supplied as a 2 pack system of base and curing agent. Formulated in conjuction with the range of Resincoat MRSA coatings to provide a system of full biological control.
Resincoat MRSA Primer has been independently tested (ISO 22196) and Certified.
Warning: Last items in stock!
|Product Name||Resincoat Primer|
|Availability||In stock 1-2 days. Bespoke 3-5 days.|
|Thickness||200-300 microns dry film (2 coats)|
|Substrates||Most porous surfaces (ask for advice)|
|Ambient Temperature||During application 10-30 degrees|
|Drying Time||4-6 hrs|
|Product Components||Twin pack|
|Technical Data||See attached|
|Coverage||Depending on the porosity of the surface 4-6 m per kg|
|Typical Installations||Anywhere requiring infection control|
|Operating Temperature||Products should be conditioned for 24 hours in a warm room prior to use. Do not store outside.|
Resincoat MRSA Primer is a two part anti-microbial coating which inhibits the growth of surface bacteria. The antibacterial action of this primer is developed in our laboratory with accreditation from Biomaster, the UK's leading supplier of antimicrobial agent.
Our Antibacterial agent is dispersed throughout the thickness of the film. Cleaning of the coating both mechanically and manually will not diminish the activity of our products.
|Resincoat Anti-bacterial MRSA Resistant Floor Paint is approved by Biomaster, the UK's leading body for antimicrobial and antibacterial agents.|