Improved Durability with 2-Pack Polyurethane Excellence

Our two-pack polyurethane system sets a new standard in floor protection, outperforming traditional single-component coatings with its exceptional chemical resistance, durability, and UV stability. Designed specifically for the demands of industrial settings, it withstands heavy traffic, harsh chemicals, and prolonged exposure to sunlight without fading or wearing thin. The effectiveness of this system is rooted in its chemical reaction, where the resin and hardener combine to form a robust barrier against damage and deterioration. This innovative formula not only ensures your floors will resist the rigours of industrial use but also maintains their aesthetic appeal with a semi high-gloss finish that lasts. Quick to apply and fast to dry, Resincoat Polyurethane Floor Paint promises a straightforward application process with long-lasting results, making it the superior choice for facilities prioritising both functionality and style.

 

COVERAGE RATES

Please see below for coverage rates. If you are coating a large area and would like expert advice, please call our team who will be happy to assist you.

2.5kg: 15-20m²

Please note: the above coverage rates are per coat, in most cases we advise 2 coats.

 

APPLICATION GUIDE

Preparation

Old paint finishes should be removed if flaking at all and the surface should be sanded to create a texture (also known as a mechanical key) prior to applying Resincoat Chemical Resistant UVR Floor Paint. When preparing for a floor coat, doing so mechanically (shot-blasting or grinding) is always advisable for best results, but if that is not possible then sanding the area or our Etch and Clean is a good alternative. After the surface has been completely abraded, thoroughly sweep and vacuum the area of any remaining dust or contaminants. For more information on preparation, please see technical data sheet. 

Please note: Etch and Clean is only suitable for use on bare concrete.

 

Priming

For new concrete floors or floors in good condition, prime with Resincoat Damp Tolerant Primer

For dusty, old or weaker floors prime with Resincoat Deep Penetrating Primer

For greasy floors with heavy oil residue clean thoroughly using a suitable degreaser scraping off any dust or dirt and then prime with Resincoat Oil Tolerant Primer

 

Application

We advise when applying this product the ambient temperature is at least 7°C.

1. Mix Part A on its own with a mixing paddle attached to an electric drill for about 1 minute before adding ALL of Part B and continue to mix for another 90 seconds, keeping the paddle in suspension to avoid mixing air into the unit.

2. Pour entirety of the tin's contents into a plastic paint scuttle or tray.

3. Immediately begin applying your paint with a nylon-bonded resin suitable roller.

4. Use a brush around the edges to cut in (a second pair of hands can be useful for this stage).

5. As soon as the first coat has started curing (is no longer tacky to touch) you can re-coat; this should take 12-24 hours.

6. The cured final coat is ok for foot traffic. Cars and heavy objects, however, should be left off the new coating for the first 48 hours and chemicals including water should not be introduced for the first 7 days (Full chemical cure).

 

PLEASE NOTE: The pot life of this product is 30 minutes. This means that once parts have been mixed, the paint will start to chemically cure after this time. Ensure you remove the paint from the tin in this window. The paint will then be workable on your floor for up to 40-60 minutes. 

Pot life = Time to harden in pot following addition of hardener

Working Time = Time to apply product before it becomes unworkable

 

USEFUL INFORMATION

Roller sleeves should be used once per coat, two coats will require two roller sleeves.

Please note: there may be colour differences between this product and our Epoxy Floor Paint products.

This product should NOT be split. Taking smaller quantities from each tin, even if measured correctly, may cause issues with activating.

This product is NOT self levelling.

EFP013

Data sheet

Appearance
Coloured, Semi-Gloss Finish
Composition
Solvent Based Polyurethane Coating
Substrates
Bare Concrete, Wood, Screeds, Steel
Product Components
Resin (Part A) + Activator (Part B)
Typical Installations
aircraft hangars, chemical plants, garages and most other industrial environments
Re-coat/Foot-traffic Time (at 20°C)
6 Hours
Drying Time (at 20°C)
12-24 Hours
Pot Life
The Pot Life Of This Product Is 30 Minutes
Application Tools
Roller Sleeve and Frame, Brushes

Specific References

ean13
5056489401949
upc
500307336609

Download

Colour Chart

Download (129.88KB)

Industrial PU Coating TDS

Download (469.32KB)

Frequently Bought Together

16 other products in the same category:

Comments (1)
Reviews