DESCRIPTION

The Triple Garage Floor Paint bundle is a cost-effective solution allowing you to achieve the sought after showroom finish at home or in the workplace. This kit includes are best-selling epoxy garage floor coating guaranteeing a stunning high gloss finish. The epoxy is incredibly durable and is great for garage and auto repair centres where there is heavy foot and vehicle traffic. Easy to clean the formula is oil and petrol resistant along with other fluid you will find in car workshops ensuring you coating lasts for many years. 

Available in a wide range of colours you can tailor your coating to your home or commercial setting. Our bundle makes application easy with all the equipment included for you to easily mix and apply. The paint cures in 24 hours meaning there is little disruption to your business. We proudly manufacture all our epoxy resin coatings in the UK for guaranteed performance ensuring the paint lasts for many years whilst remaining in excellent condition.

 

KIT QUANTITIES

See below the exact quantities for each product that is supplied in our Triple Garage Floor Paint Bundle kits:

50m2 Kit Contains 60m2 Kit Contains 80m2 Kit Contains
2 x 5kg Primer 3 x 5kg Primer 4 x 5kg Primer
1 x 2.5kg Primer 6 x 5kg Epoxy Garage Floor Paint 8 x 5kg Epoxy Garage Floor Paint
4 x 5kg Epoxy Garage Floor Paint 1 x Roller Frame 1 x Roller Frame
2 x 2.5kg Epoxy Garage Floor Paint 3 x Roller Sleeves 3 x Roller Sleeves
1 x Roller Frame 1 x Paint Scuttle 1 x Paint Scuttle
3 x Roller Sleeves 1 x Mixing Paddle 1 x Mixing Paddle
1 x Paint Scuttle 3 x Paint Brushes 3 x Paint Brushes
1 x Mixing Paddle 1 x Pair of Disposable Gloves 1 x Pair of Disposable Gloves
3 x Paint Brushes
1 x Pair of Disposable Gloves

 

APPLICATION GUIDE

Preparation

Old paint finishes should be removed if flaking at all and the surface should be sanded to create a texture (also known as a mechanical key) prior to applying Resincoat Triple Garage Floor Paint Bundle. When preparing for a floor coat, doing so mechanically (shot-blasting or grinding) is always advisable for best results, but if that is not possible then sanding the area or our Etch and Clean is a good alternative. After the surface has been completely abraded, thoroughly sweep and vacuum the area of any remaining dust or contaminants. For more information on preparation, please see technical data sheet. 

Please note: Etch and Clean is only suitable for use on bare concrete.

 

Priming

For new concrete floors or floors in good condition, prime with Resincoat Damp Tolerant Primer

For dusty, old or weaker floors prime with Resincoat Deep Penetrating Primer

For greasy floors with heavy oil residue clean thoroughly using a suitable degreaser scraping off any dust or dirt and then prime with Resincoat Oil Tolerant Primer

 

Application

We advise when applying this product the ambient temperature is at least 7°C.

1. Mix Part A on its own with a mixing paddle attached to an electric drill for about 1 minute before adding ALL of Part B and continue to mix for another 90 seconds, keeping the paddle in suspension to avoid mixing air into the unit.

2. Pour entirety of the tin's contents into a plastic paint scuttle or tray.

3. Immediately begin applying your paint with a nylon-bonded resin suitable roller.

4. Use a brush around the edges to cut in (a second pair of hands can be useful for this stage).

5. As soon as the first coat has started curing (is no longer tacky to touch) you can re-coat; this should take 12-24 hours.

6. The cured final coat is ok for foot traffic. Cars and heavy objects, however, should be left off the new coating for the first 48 hours and chemicals including water should not be introduced for the first 7 days (Full chemical cure).

 

PLEASE NOTE: The pot life of this product is 20 minutes. This means that once parts have been mixed, the paint will start to chemically cure after this time. Ensure you remove the paint from the tin in this window. The paint will then be workable on your floor for up to 40 minutes. 

Pot life = Time to harden in pot following addition of hardener

Working Time = Time to apply product before it becomes unworkable

 

USEFUL INFORMATION

Roller sleeves should be used once per coat, two coats will require two roller sleeves.

This product is NOT UV stable therefore can discolour when exposed to regular sunlight. For areas with plenty of repeated sunlight, please coat with a coloured UVR coating such as Resincoat Chemical Resistant UVR Floor Coating for a UV stable finish.

This product should NOT be split. Taking smaller quantities from each tin, even if measured correctly, may cause issues with activating.

This product is NOT self levelling.

If you require a clear epoxy coating visit our clear epoxy product here.

Please note: all Resincoat Bundles are sold as complete sets, individual units may not be returned or refunded.

GFP003

Data sheet

Appearance
Professional, High Gloss Finish
Composition
100% Solids
Substrates
Bare Concrete, Wood, Screeds, Steel
Product Components
Primers and Paints contain: Resin (Part A) + Activator (Part B)
Typical Installations
Garages, Industrial Storage Areas, Basements and more
Solvent Content
Solvent Free
Re-coat/Foot-traffic Time (at 20°C)
8-12 Hours
Drying Time (at 20°C)
12-24 Hours
Pot Life
The Pot Life Of This Product Is 20 Minutes
Application Tools
Rollers, Brushes

Specific References

ean13
5056489431540
upc
500582313715

Download

Garage Floor Paint TDS

Download (1.24MB)

Colour Chart

Download (129.88KB)

Frequently Bought Together

16 other products in the same category:

Comments (5)
Reviews