Resincoat Pro Stabilising Primer is a water-based primer specially formulated to seal unstable areas which remain powdery and chalky after the surface has been thoroughly prepared for painting. The product can be applied to brick, stone, render, concrete, plaster, pebbledash, stucco, existing painted surfaces or firable surfaces prior to overcoating.
For outdoor use, not suitable with Resincoat High Build Paints
Warning: Last items in stock!
|Size||Available in 10Kg and 20Kg|
|Product Name||Resincoat Pro Stabilising Primer|
|Substrates||Previously Coated Surfaces|
|Drying Time||Touch Dry in 1 Hour Re Coat in 1-4 Hours|
Remove loose or flaking material. Make sure the surface is clean (no dirt or grease) and dry. Seal: If new, bare and absorbent surface, seal with this product, thinned 10% with water.
Stir to ensure paint is completely mixed. Dry: Apply 2 coats with a brush or roller, leave 2-4 hours between coats. Do not apply in very damp or humid conditions or extreme temperatures. TIP: if the colour change is strong, more coats may be required.
Remove paint from the brush or roller with a cloth and then wash with water Store: Store the paint in dry conditions and protect from any extreme temperatures.
£ 27.12 -30% £ 38.74
£ 340.99 -20% £ 426.24
£ 650.99 -20% £ 813.74