Thermicoat Pro Stabilising Primer View larger

Thermacoat Pro Stabilising Primer

New

Thermacoat Pro Stabilising Primer is a water-based primer specially formulated to seal unstable areas which remain powdery and chalky after the surface has been thoroughly prepared for painting. The product can be applied to brick, stone, render, concrete, plaster, pebbledash, stucco, existing painted surfaces or firable surfaces prior to overcoating.

  • Highly Penetrating
  • Suitable for Both Internal and External
  • Stabilises Powdery Masonry Surfaces
  • Penetrates Deeply into Dusty Chalky and Badly Weathered Surfaces
  • Ready for Use
  • Stabilises Powdery Masonry Surfaces

More details

£ 69.54 inc VAT

£ 57.95   ex VAT

Data sheet

SizeAvailable in 10Kg and 20Kg
Product NameThermicoat Pro Stabilising Primer
AppearanceN/A
CompositionWater Based
SubstratesPreviously Coated Surfaces
Drying TimeTouch Dry in 1 Hour Re Coat in 1-4 Hours
Technical DataSee technical data sheet in Downloads
Coverage5-8 sqm/kg

More info

Preparation

Remove loose or flaking material. Make sure the surface is clean (no dirt or grease) and dry. Seal: If new, bare and absorbent surface, seal with this product, thinned 10% with water.

Paint

Stir to ensure paint is completely mixed. Dry: Apply 2 coats with a brush or roller, leave 2-4 hours between coats. Do not apply in very damp or humid conditions or extreme temperatures. TIP: if the colour change is strong, more coats may be required.

Clean

Remove paint from the brush or roller with a cloth and then wash with water Store: Store the paint in dry conditions and protect from any extreme temperatures.

Reviews

Write a review

Thermacoat Pro Stabilising Primer

Thermacoat Pro Stabilising Primer

Thermacoat Pro Stabilising Primer is a water-based primer specially formulated to seal unstable areas which remain powdery and chalky after the surface has been thoroughly prepared for painting. The product can be applied to brick, stone, render, concrete, plaster, pebbledash, stucco, existing painted surfaces or firable surfaces prior to overcoating.

  • Highly Penetrating
  • Suitable for Both Internal and External
  • Stabilises Powdery Masonry Surfaces
  • Penetrates Deeply into Dusty Chalky and Badly Weathered Surfaces
  • Ready for Use
  • Stabilises Powdery Masonry Surfaces

Write a review

Customers who bought this product also bought:

10 other products in the same category: