DESCRIPTION
Designer Finish Patio Paint
A sample pot for Resincoat Outdoor Patio Paint, this has been specifically formulated for the DIY user. Easy to use with great, long lasting results. The easy-to-use concrete flag paint is suitable for almost any outdoor patio area. The formula is a one-pack acrylic paint which means no hardener or activator is required. Once you are ready to paint, just open the tin and apply using a brush or roller. We currently offer 5 fantastic colour options which will rejuvenate any patio space.
COVERAGE RATES
A sample pot size is provided in 0.5kg, which provides approximately 5m² (depending on the porosity of the surface)
APPLICATION GUIDE
Preparation
It's important to ensure that the surface is completely clean before the application of the paint. Jet washing should be performed on a fan setting at roughly 30cm distance from surface or with a dedicated rotary patio cleaner. Do not use jet patterns or turbo type lances.
Once washed, the surface should then be allowed to fully dry, followed by an application of a suitable etching formula, such as Resincoat Etch and Clean. Once cleaned of the etching formula and brushed clear, your patio should be prepared for the application of your paint. Due to the amount of variation in patio substrates, however, we highly recommend applying the paint to a small test area first to ensure a perfect bond and desired finish.
Important: Apply only in dry conditions - ideally the coating should avoid rainfall for 2 days where possible.
Application
Brush/Roller application:
1. Stir the paint thoroughly before use.
2. Apply your first coat with a brush or roller (start at the corner of painting area and working inwards). Please note: the paint should be applied thinly.
3. Leave to dry for between 4 to 6 hours.
4. Apply your second coat (two coats are recommended).
5. If you have paint remaining, the tin can be re-sealed and stored for further use.
Please note: When working with Resincoat Outdoor Patio Paint, it is possible for you to wash your tools, brushes and rollers with warm, soapy water once you have completed your project.
Once applied ensure the floor is not subject to any contamination as this could cause the coating to fail.
USEFUL INFORMATION
Be advised: Do not apply the product in damp, humid or extreme temperatures.
