DESCRIPTION

Resincoat Universal Floor Cleaner is a floor cleaning and preparation product which, when diluted in water, offers a heavy duty cleaning solution for greasy and oil contaminated areas. Ideal for cleaning up industrial spills and dirt on both blank concrete and cured epoxy coatings. With Resincoat Universal Floor Cleaner, your floor will look like new.

 

COVERAGE RATES

Each pack will have variable coverage based on the level of dilution. Coverage will also vary depending on the porosity of the surface if applied to bare concrete.

 

APPLICATION GUIDE

Dilution Ratios:

Heavy grease, oil and petrol removal: Dilute 1:50 with water (100ml per 5L)

General floor cleaning/preparation: Dilute 1:100 with water (50ml per 5L)

Light cleaning for pre-prepared floors: Dilute 1:250 with water (20ml per 5L) 

 

Preparation and Application

1. Pour Resincoat Universal Floor Cleaner into a suitable receptacle and dilute with water as needed.

2. Apply the diluted solution via a cloth, brush or spray. 

3. Allow the solution adequate contact time on the surface for a few minutes and agitate it where necessary. 

4. Once applied and the dirt has been lifted by the solution rinse the floor with clean water to remove any trace chemicals that might cause damage if allowed to rest for too long.

RC5000

Specific References

ean13
5056489415571
upc
500535705918

Download

Resincoat Floor Cleaner TDS

Download (371.36KB)

7 other products in the same category:

Comments (2)
Reviews