- On sale!
- -10%
Ultracure DPC Injection Cream Kit - 380ml
£54.67
£49.20
Save 10%
£41.00 ex VAT.
Tax included
Ultracure DPC Injection Cream is a BBA-approved DPC Injection Cream. This kit has everything you need for a robust defence against rising damp. This potent cream is expertly designed to facilitate the creation of a new DPC in walls of diverse compositions, even those with high moisture saturation.
- Provides superior protection against the challenge of rising damp
- Offers quicker installation compared to traditional high pressure DPC methods
- Ensures clean, simple application with precise, low-pressure injection technique
- Boasts a solvent-free formula for safer, eco-friendly use
Ultracure DPC Injection Cream
BBA-approved Ultracure DPC Injection Cream offers lasting defence against rising damp through its potent formulation. This cream is engineered for efficient new DPC creation within walls of varied types, accommodating even those with the most elevated moisture levels.
Its formulation ensures deep substrate penetration while keeping application clean and straightforward, establishing a durable horizontal barrier against moisture and soil salts, thereby permanently halting rising damp.
For those in need of a comprehensive DPC Injection Kit, Ultracure provides both supreme convenience and cost savings when purchased in bulk.
Advantages of DPC Cream Injection:
Chemical DPC injections have transformed the damp proofing industry as a viable substitute for traditional physical DPC installations over the last five decades, favouring the innovative, quick, and cost-effective DPC creams for safer and more efficient rising damp treatments.
- The cream's unique formula transitions to liquid for superior depth penetration.
- Offers perpetual damp resistance, maintaining efficacy as long as the mortar remains intact.
- Installation is streamlined and tidy, with the cream's consistency and low-pressure delivery minimizing spillage and facilitating precise application.
- Contributes to energy cost savings by addressing rising damp, which reduces heat loss through damp walls.
KIT QUANTITIES
Our 380ml DPC Cartridges are now offered in a comprehensive kit designed for the installation of a new deep penetrating course:
| 6 x 380ml | 12 x 380ml | 20 x 380ml |
| 12 x 380ml Ultracure DPC Injection Cream Cartridge | 20 x 380ml Ultracure DPC Injection Cream Cartridge | |
|
1 x Cartridge Gun |
1 x Cartridge Gun | 1 x Cartridge Gun |
| 1 x Extendable Nozzle | 2 x Extendable Nozzle | |
| 1 x 12mm SDS Drill Bit | 1 x 12mm SDS Drill Bit | |
|
|
COVERAGE RATES
The following coverage rates are per 1x380ml cartridge at various wall thicknesses:
| Wall Thickness | Coverage for 380ml Cartridge |
| 115mm | 3.5 Linear Metres (at a depth of 100mm) |
| 230mm | 1.75 Linear Metres (at a depth of 210mm) |
| 345mm | 1.15 Linear Metres (at a depth of 320mm) |
| 460mm | 0.875 Linear Metres (at a depth of 430mm) |
APPLICATION GUIDE
Preparation
- Identify potential areas of excessive water ingress, fixing or adding drains as needed.
- Strip skirting, fittings, and wall finishes to reveal the DPC line, removing plaster contaminated with salts up to 300 mm above damp levels.
- Inspect and address any fungal damage in floor timbers, replacing if necessary.
- Clear wall cavities of any obstructions.
Application
- Identify a mortar joint at least 150mm above the external ground level or adjacent to the internal floor level for solid floors, ensuring both internal and external DPCs align.
- Drill 12mm diameter holes horizontally at no more than 100mm apart in the selected mortar joint, to a depth 20mm shy of the wall's thickness.
- Remove drilling debris from the holes with a vacuum or borehole blower.
- Prepare the Ultracure DPC Cartridge by cutting the tube's top for cream flow and attaching the nozzle (if needed, an extension tube). Then, load into a cartridge gun.
- Inject the cream into each hole, starting from the back and slowly withdrawing the nozzle as it fills, stopping roughly 10mm from the hole's exterior.
Plugging
On external faces of walls, drill holes can be re-pointed using a matched mortar or can be plugged with DPC Injection Plugs (available in a choice of 2 colours). On internal faces holes can be left open and plaster stopped short of the DPC.
DPC005
Specific References
- ean13
- 5056771739897
Ultracure DPC Injection Cream is a BBA-approved DPC Injection Cream. This kit has everything you need for a robust defence against rising damp. This potent cream is expertly designed to facilitate the creation of a new DPC in walls of diverse compositions, even those with high moisture saturation.
- Provides superior protection against the challenge of rising damp
- Offers quicker installation compared to traditional high pressure DPC methods
- Ensures clean, simple application with precise, low-pressure injection technique
- Boasts a solvent-free formula for safer, eco-friendly use
Comments (0)