Resincoat Pro Drive is a high quality block paving sealer. Our sealer for block paving and joint stabilising product are suitable for most types of block paving and cobble pavers, apart from clay pavers.
Warning: Last items in stock!
|Size||Available in 20Kg and 25Kg|
|Product Name||Resincoat Pro Drive|
|Substrates||Block and Cobble Pavers|
|Drying Time||Touch Dry in 1-2 Hours Re Coat in 4 Hours|
Remove loose or flaking material. Make sure the surface is. clean (no dirt or grease) and dry.
Clean paving thoroughly with a pressure washer, remove all traces of weeds, algae stains, lichen and any other old stain. Ensure the entire area is completely dry, clean and free of debris before sealing Only refill the joints with kiln dried sand on the same day as application. Check that no sand remains on the surface of the paving. Before commencing sealing ensure that you have the correct application tools and sufficient amount of sealer to complete the task. Use a brush, roller or squeegee and apply the paving sealer as.
First remove excess material from the brush. Pour a little solvent into your vessel and place your paint brush into your solvent. Swirl and move your brush back and forth in the solvent. Continue until all of the block paving has been removed.