Resincoat Patio Primer

Model

Condition New

NEW IMPROVED FORMULATION

Resincoat Patio Primer is a clear primer designed for use before Resincoat Outdoor Patio Paint. There are many different types of patio surface, so it's important to prime the area before painting to ensure a perfect bond between the patio and paint. This product will act as a sealer to prevent any re-growth of moss and algae which could cause the patio coating to fail.

Allow 48 hours between each step of the preparation process. Etch and allow to dry for 48 hours. Prime and allow to dry for 48 hours. Paint can then be applied and is trafficable after 8-12 hours.

Clear/Transparent finish - seals the patio surface.
One-pack product, simply stir and apply
Jet washable
Pet & wildlife friendly/non-toxic formulation

Please note it is critical to open the patio surface with an etching product prior to application of this primer and paint. We recommend use of Resincoat Etch & Clean.

More details

Write a review

Additional Product Data

Appearance	Clear/Transparent finish
Composition	UV Stable Acrylic Primer
Substrates	Concrete flags, patio slabs, other concrete patio surfaces including sandstone, Indian sandstone tiles, brick.
Drying Time	Touch Dry in 4 hours
Coverage	35m-50m² /coat per 5kg unit

More info

Surface preparation is the key to successfully painting your patio

Throughout our thorough testing process we have found the longest lasting results using both Resincoat Etch & Clean and Resincoat Patio Primer. Much like with any painting job, succesful preparation is the key to great results. As mentioned above you will need to allow 48 hours after applying the etching fluid before priming your patio surface. You should also allow 48 hours after priming to confirm the product bonds correctly to your surface. Thinly applied coats of both the primer and paint are recommended for best results.

How to prepare your patio for painting:

Important pre-requisites:

Apply only in dry conditions - ideally the coatings should avoid rainfall for 2 days where possible. 7 days should be allowed before jet washing.
Thinly applied coats are recommended
Surface should be jet washed and then allowed to fully dry before application.
Suitable etching formula must be used such as Resincoat Etch & Clean.
Due to the amount of variation in patio substrates, we highly recommend applying to a small test area first to ensure a perfect bond and desired finish.

Application:

Application for Resincoat Patio Primer is very easy. Stir thoroughly before use, no hardeners or activators are required. Simply open the tin, stir thoroughly and then apply using a brush or roller. The ideal weather conditions should be dry and warm between 5° - 25°C. Further instructions will be included with your delivery.