Availability: 48756 In Stock
Paint Mixing Paddle
This medium duty mixing paddle is capable of mixing paint, coatings, sealers and light mortars.
Resincoat Polyaspartic Rapid Dry Paint
£90.83
£90.83 ex VAT.
Resincoat Polyaspartic Rapid Dry is the fastest, safest coating system on the market for floors and walls. It is solvent free, UV stable and has been designed to replace MMA systems, which are currently being phased out due to their associated high odour.
-
VOC & Solvent Free
-
UV Stable
-
Rapid Curing (less than 2 hours at 20°C)
-
Can cure at even sub zero temperatures
-
Professional Gloss Finish
-
Superb coverage rates (15-20 sqm /2.5kg)
DESCRIPTION
Quick drying floor paint
Resincoat Polyaspartic Rapid Dry Floor Paint is touch dry in just one hour at 20°C. We can guarantee that you won't find a faster drying coating anywhere in the UK. Despite the rapid curing time, our Polyaspartic formula is designed to be user-friendly with a 30 minute pot life at 10°C giving you plenty of time to get the job done.
Cold storage flooring
Our Polyaspartic formula will cure at temperates as low as -5°C and will be stable once cured at even lower temperatures. This makes it a great option for flooring in cold storage areas, cooling units and other low temperature spaces. Due to its excellent coverage rates, Resincoat Polyaspartic is also great for larger spaces allowing you to coat an entire warehouse sized floor in just one day.
COVERAGE RATES
Please see below for coverage rates. If you are coating a large area and would like expert advice, please call our team who will be happy to assist you.
1kg: 7-8m²
2.5kg: 15-20m²
Please note: the above coverage rates are per coat, in most cases we advise 2 coats.
APPLICATION GUIDE
Preparation
Old paint finishes should be removed if flaking at all and the surface should be sanded to create a texture (also known as a mechanical key) prior to applying Resincoat Polyaspartic Rapid Dry Paint. When preparing for a floor coat, doing so mechanically (shot-blasting or grinding) is always advisable for best results, but if that is not possible then sanding the area or our Etch and Clean is a good alternative. After the surface has been completely abraded, thoroughly sweep and vacuum the area of any remaining dust or contaminants. For more information on preparation, please see technical data sheet.
Please note: Etch and Clean is only suitable for use on bare concrete.
Priming
• This product is generally considered "self-priming". However, in the cases of oil contamination, we would recommend using a suitable degreaser, scraping off any dust or dirt before priming with Resincoat Oil Tolerant Primer
Application
As opposed to typical epoxy resin paint, Polyaspartic can be applied as low as -5°C.
1. Mix Part A on its own with a mixing paddle attached to an electric drill for about 1 minute before adding ALL of Part B and continue to mix for another 90 seconds, keeping the paddle in suspension to avoid mixing air into the unit.
2. Pour entirety of the tin's contents into a plastic paint scuttle or tray.
3. Immediately begin applying your paint with a nylon-bonded resin suitable roller.
4. Use a brush around the edges to cut in (a second pair of hands can be useful for this stage).
5. As soon as the first coat has started curing (is no longer tacky to touch) you can re-coat; this should take 2 hours at 10°C.
6. The cured final coat is ok for foot traffic. Cars and heavy objects, however, should be left off the new coating for the first 16 hours and chemicals including water should not be introduced for the first 2 days (Full chemical cure).
PLEASE NOTE: The pot life of this product is 30 minutes. This means that once parts have been mixed, the paint will start to chemically cure after this time. Ensure you remove the paint from the tin in this window. The paint will then be workable on your floor for up to 40 minutes.
Pot life = Time to harden in pot following addition of hardener
Working Time = Time to apply product before it becomes unworkable
USEFUL INFORMATION
• Roller sleeves should be used once per coat, two coats will require two roller sleeves.
• This product should NOT be split. Taking smaller quantities from each tin, even if measured correctly, may cause issues with activating.
• This product is NOT self levelling.
IFP036
Data sheet
- Appearance
- Professional Gloss Finish
- Composition
- Low Viscosity, Polyaspartic
- Substrates
- Concrete, Wood And Cement Floors, Most Smooth Surfaces
- Product Components
- Resin (Part A) + Activator (Part B)
- Typical Installations
- Walkways, Packing Areas, Breweries, Shop Floors, Cold Storage Areas
- Solvent Content
- Solvent Free
- Re-coat/Foot-traffic Time (at 20°C)
- 60 Minutes
- Drying Time (at 20°C)
- 12 Hours
- Pot Life
- The Pot Life Of This Product Is 30 Minutes
- Application Tools
- Roller, Brushes
Specific References
- ean13
- 5000206780695
- upc
- 500926168735
Resincoat Polyaspartic Rapid Dry is the fastest, safest coating system on the market for floors and walls. It is solvent free, UV stable and has been designed to replace MMA systems, which are currently being phased out due to their associated high odour.
-
VOC & Solvent Free
-
UV Stable
-
Rapid Curing (less than 2 hours at 20°C)
-
Can cure at even sub zero temperatures
-
Professional Gloss Finish
-
Superb coverage rates (15-20 sqm /2.5kg)
Frequently Bought Together
Availability: 197 In Stock
Resincoat Epoxy Resin Roller Sleeve is expertly crafted from thermo-bonded nylon & stands resilient against chemicals that typically harm roller sleeves. It's the ideal choice for projects involving solvent-based materials and 2-component paints, such as our epoxy and polyurethane resins. With precision application, exceptional durability, and compatibility with our own resin products, this versatile roller sleeve ensures professional-quality results, always.
- Chemical resistant
- Durable thermo-bonded nylon
- Precision application
- Ideal for use with epoxy coatings
Availability: 49034 In Stock
These Paint scuttles are perfect for a range of uses when applying floor coatings. Useful for general transport of tools, tool cleaning, mixing and aidiing the transfer onto the floor with easy access for Resincoat nylon roller refills.
Availability: 48184 In Stock
Reusable 12 inch roller cage for floor paint and sealer application. To be used with a standard mop handle, not included with this product.
Availability: 3604 In Stock
Resincoat Etch and Clean is the easy way to prepare and clean your concrete floor before painting or resurfacing.
This product can be used on brick and concrete surfaces to remove laitance and neutralize alkalinity in new concretes (concretes must be at least 1 month old).
-
Removes a weak, dusty layer (laitance) on new floors
-
Provides a key for future coatings on smooth concrete
-
Excellent alternative to mechanical surface prep
-
Reduces alkalinity of new concrete to ensure a great bond
-
Colour changing formula indicates neutralisation
16 other products in the same category:
Availability: 49976 In Stock
Resincoat Epoxy Showroom paint is a high quality two part epoxy resin floor coating that offers a stunning professional finish. Boasting a high gloss design that will create a stylish, elegant feel in any showroom, exhibition space or gallery the paint will ensure your space is always looking its best. Designed to provide very good abrasion resistance the coating is exceptionally durable lasting for many years.
-
Luxurious gloss finish
-
Suitable for heavy foot traffic
-
Great range of colours
-
Easy to clean & maintain
-
High quality epoxy resin
-
Long lasting design
-
Low VOC and Solvent Free
Availability: 49268 In Stock
Resincoat Clear Epoxy Coating is an ideal solution for coating and sealing concrete floors in domestic and industrial settings. It is also frequently used on worktops and displays as a protective coating. This coating boasts a clear, high gloss design that exhibits the highest strength, whilst offering a professional finish for both DIY and professional users alike. It is resistant to dirt, grease and oil and when dry the product creates a clear, dust free finish.
-
High build epoxy resin
-
Low VOC and Solvent & Diluent free
-
100% Solids
-
High gloss finish
-
Durable design
-
Superb coverage rates
Get a quote for your commercial project
Also Available:
Availability: 4984 In Stock
Resincoat Factory Floor Paint Bundle gives you everything you need to create a professional resin system in a factory or industrial space of up to 100m² or 120m². You will receive our best selling HB Factory Floor Paint, primer of your choosing, anti-slip option and full accessory kit designed to make application as smooth as possible.
-
High Build Professional Finish
-
Heavy Duty - Suitable for forklift & vehicular traffic
-
Solvent Free - Unlike cheaper epoxy floor paints
-
Ready to use in just 24 hours
-
Highly attractive gloss finish
Availability: 47945 In Stock
Resincoat High Build Epoxy Garage Floor Paint is a two-part epoxy resin floor paint designed for garage floors. The original Resincoat formula offers a long-lasting smooth, glossy finish at the highest possible quality. This paint offers excellent resistance to foot traffic and vehicles. Ideal for both DIY/home users and industrial users alike, the floor paint can be easily applied with the surface usable again within 24 hours.
-
100% Solids
-
Two Part Epoxy (Includes A & B)
-
Low VOC and Diluent & Solvent Free
-
Not water based like cheaper alternatives
-
Stunning gloss finish
-
Oil & Petrol Spill Resistant
-
Superb coverage rates (17 - 20+ sqm /5kg)
All our resin products are proudly manufactured, tested and packed by Resincoat in the UK to the highest ISO9001 standards.
Availability: 4892 In Stock
Resincoat Acid Resistant Floor Coating is a high build epoxy coating designed to have excellent resistance against aggressive acids, solvents and alcohols. As well as excellent acid and chemical resistances, this coating provides a tough and durable industrial finish that will withstand heavy use with ease.
-
100% Solids
-
Outstanding acid resistance
-
Excellent adhesion to steel and concrete
-
Highly durable, tough coating
-
Abrasion resistant
-
Low VOC and Solvent Free
Availability: 49864 In Stock
Resincoat penny floor epoxy is a clear epoxy resin ideal for creating coin cast flooring or penny floor designs. The epoxy resin will set clear with a smooth, attractive finish which really brings out the coins underneath. This formula is designed to provide a clear, protective finish to protect the material underneath.
-
Unique professional finish
-
Incredibly durable
-
Surface Usable in 24hrs
-
Suitable for heavy traffic
-
100% high quality epoxy
-
Easy to clean
Availability: 49960 In Stock
Resincoat PU is a hard wearing polyurethane floor coating designed for extra chemical resistance and durability. This two-pack coating is ideal for painting aircraft hangars, chemical plants, garages and most other industrial environments requiring a UV stable and easy to clean surface.
-
Semi-gloss finish
-
Highly durable
-
Solvent based coating
-
Great chemical resistance
-
Industrial strength
Availability: 5000 In Stock
Resincoat Metallic Epoxy Countertop Kit is ideal for homeowners to create stunning, unique designs transforming any existing surface. Use our kit to coat directly over countertops, kitchen islands and other surfaces to create stunning marble effects and attractive metallic surfaces. The kit is easy to install and is a cost effective method for DIY users to achieve a high quality, professional finish.
1.25m² Kit Contains:
- Resincoat Metallic Primer
- Resincoat Metallic Epoxy Paint (Already Pigmented) *Please choose your 2 colours using the drop down boxes. Colours will be supplied with a 50-50 ratio.
- Resincoat Water-based Top Coat
*Please take care when selecting your primer colour as this may show through in the final finish
-
Great alternative to marble or granite
-
Easy to clean & wipe down
-
Amazing finishes at a cost-effective price
-
Totally unique design & finish
-
Great choice of colour options - high gloss finish
Availability: 49987 In Stock
Resincoat Weatherguard Extreme (Clear) is an exterior masonry paint that provides excellent UV resistance which can be applied at sub-zero temperatures.
This product is the fastest, safest coating system on the market for walls. It is solvent free, UV stable and has been designed to replace MMA systems, which are currently being phased out due to their associated high odour.
-
VOC Free
-
UV Stable
-
Rapid Curing (less than 60 minutes at 20°C)
-
Can cure at even sub zero temperatures
-
Professional High Gloss Finish
-
Highly Durable
-
Superb coverage rates (40 sqm/5kg)
Availability: 50000 In Stock
Resincoat Ecomarine HB Epoxy Boat Paint is engineered to resist salt and corrosive elements in ocean water, providing durable protection for boats and sea-faring vessels. Its high build properties make it suitable for freshwater boats, and with just two coats, it offers the strength equivalent to ten coats of traditional solvent coatings. Durable, anti-slip, and chemically resistant, this paint redefines marine coatings with efficiency and robust defence.
-
Salt water resistant
-
Easy to clean
-
Surface Usable in 24hrs
-
Excellent anti slip resistance
-
Superb coverage rates (17 - 20+ sqm /5kg)
Availability: 500 In Stock
IMPROVED FORMULA
Resincoat epoxy flake flooring system allows you to create a completely bespoke epoxy floor. Offering all the advantages of our best-selling epoxy floor coating this system also has the added attraction of unique, decorative flakes. The flakes create a smooth appearance that is easy to clean, boasting industrial strength ideal for heavy foot and vehicle traffic.
-
Unique bespoke design
-
UV Stable system
-
Choice of 4 stunning flake blends
-
High quality professional finish
-
Easy to clean
-
Oil Tolerant
-
100% Solids
-
Low VOC and Solvent Free
Availability: 494 In Stock
Resincoat Fast Cure Epoxy Primer is ideal for fast turnaround flooring projects. The primer rapidly cures in 3 hours, at 20°C, allowing you to prime and paint the floor in 1 day. The primer is suitable for sound concrete protecting and sealing your surface ready to paint. By using a primer you improve the coverage of your top coat, as well as improving the durability of your epoxy floor paint.
-
Ideal for use with Resincoat Fast Cure Garage Floor Paint
-
Excellent adhesion & sealing qualities
-
UK Manufactured
-
High strength formula
-
Oil tolerant
-
Superb coverage
Availability: 49912 In Stock
Resincoat Hygienic Kennel & Cattery Paint is a heavy-duty epoxy resin floor coating designed for highly trafficked areas where contact with animals is highly likely. Our formula is animal safe, antibacterial and exhibits the highest strength whilst offering smooth, attractive gloss finish. Our coating has been used in animal centres throughout the UK and proven to be a long-lasting, effective solution to floor coating this type of space.
-
Easy to apply & clean
-
Anti-bacterial
-
Perfect for animal centres, kennels and catteries
-
Incredible durable
-
Low VOC and Solvent & Diluent Free
-
Optional Anti-Slip
Availability: 500 In Stock
Resincoat Express Installation Garage Floor Paint Bundle offers a 1 day installation, providing a quick turnaround on flooring projects. The kit contains Resincoat quick cure primer, coat 1 of quick cure epoxy and a topcoat of standard epoxy, offering a long lasting high gloss finish. The paint is incredibly durable and can withstand heavy foot and vehicle traffic.
-
1 day installation
-
UK manufactured 100% epoxy resin
-
Rapid cure primer and first coat
-
Oil & petrol resistant
-
High strength formula designed to last
Availability: Out of stock
Resincoat Wood Floor Paint is a hard-wearing decorative matt floor coating suitable for wood floorboards. Ideal for restoring your existing wooden flooring this coating is offered in a great choice of colours and has a smooth finish. The acrylic paint will seal and protect your flooring from every day scuffs and scratches. Highly durable the formula boasts a long lasting design.
-
One pack application - no mixing
-
Attractive matt finish
-
Completely washable
-
Great range of colours
-
Highly durable design
-
Stylish smooth finish
-
Quick drying in 4 hours
Availability: 42 In Stock
Resincoat Reflective Line Marking Paint is a chlorinated rubber based heavy duty line marking paint ideal for use on concrete, asphalt or tarmac. Quick drying and extremely tough this item is a cost effective solution whilst offering a high strength formula. It contains reflective glass beads to create a bright, bold appearance that will reflect any lines or markings on your surface.
-
Quick drying time
-
Highly durable
-
Good slip resistance
-
Ideal for indoor & outdoor use
-
Professional finish
Comments (8)
Reviews