Stylish Outdoor Patio Area

Resincoat patio floor paint allows you to get creative with your outdoor space and give it a stylish, modern appearance. With 5 on-trend colours to choose from you are guaranteed to find a finish that with brighten any existing tired or run down slabs. Your patio forms the foundation of your outdoor area creating a perfect space to entertain and socialise therefore ensuring a high quality finish is important. Our paint offers a stylish matt appearance whilst also preventing the regrowth of algae and moss, ensuring little maintenance is required. It's easy to clean the coating, can be jet washed and is pet and wildlife friendly.



Light Ivory

Goose Grey

Storm Grey

Anthracite Grey




Please see below for coverage rates. If you are coating a large area and would like expert advice, please call our team who will be happy to assist you.

5kg: 35-50m² (depending on the porosity of the surface)

Please note: the above coverage rates are per coat, in most cases we advise 2 coats, especially if painting on cements posts or gravel boards.



  • 3 x 5Kg Etch and Clean
  • 3 x 5L patio floor paint
  • 2 x floor paint brush
  • 1 x 12" roller sleeve
  • 1 x 12" roller frame
  • 1 x paint scuttle




It's important to ensure that the surface is completely clean before the application of the paint. Jet washing should be performed on a fan setting at roughly 30cm distance from surface or with a dedicated rotary patio cleaner. Do not use jet patterns or turbo type lances.

Once washed, the surface should then be allowed to fully dry, followed by an application of a suitable etching formula, such as Resincoat Etch and Clean. Once cleaned of the etching formula and brushed clear, your patio should be prepared for the application of your paint. Due to the amount of variation in patio substrates, however, we highly recommend applying the paint to a small test area first to ensure a perfect bond and desired finish.

Important: Apply only in dry conditions - ideally the coating should avoid rainfall for 2 days where possible. 



Brush/Roller application:

1. Stir the paint thoroughly before use.

2. Apply your first coat with a brush or roller (start at the corner of painting area and working inwards). Please note: the paint should be applied thinly

3. Leave to dry for between 4 to 6 hours.

4. Apply your second coat (two coats are recommended).

5. If you have paint remaining, the tin can be re-sealed and stored for further use.


Please note: When working with Resincoat Outdoor Patio Paint, it is possible for you to wash your tools, brushes and rollers with warm, soapy water once you have completed your project.

Once applied ensure the floor is not subject to any contamination as this could cause the coating to fail.



Be advised: Do not apply the product in damp, humid or extreme temperatures.

Please note: all Resincoat Bundles are sold as complete sets, individual units may not be returned or refunded.


Data sheet

Smooth, Coloured Matt Finish
UV-Stable Acrylic Formula
Concrete flags, patio slabs, other concrete patio surfaces including sandstone, Indian sandstone tiles, brick.
Product Components
One-Pack System
Typical Installations
Perfectly suited for patios and outdoor areas
Re-coat/Foot-traffic Time (at 20°C)
4-6 Hours
Drying Time (at 20°C)
8 Hours
Application Tools
Roller, Brush, Pad

Specific References



Etch'N'Clean TDS

Download (350.46KB)

Outdoor Patio Paint TDS

Download (386.26KB)

Colour Chart

Download (130.06KB)

16 other products in the same category:

Comments (1)