Top sellers


New products




I have a dance school I need a painted surface that will allow a certain amount of slide. 
Do I need your HBE021 Epoxy Resin Paint or the non slip product.

I can see that you have ordered a non slip High Build Epoxy Resin paint in black.
This is not a non slip product.
You have highlighted the fact that the surface should be able to allow a certain amount of controlled slide for dancing. So from that point of view it is ideal.
The surface you will get is the same as is used in thousands of applications throughout all industries. 
 The safety aspect is the same as many other surfaces in as much that if you spill water or other liquids etc on the floor it will be slippy. Common sense.
That basically is the advice we have to give but in the end it is the client who, given all the circumstances,  has to make the final decision on the correct product.

Q I have a new build house.

Can I use your paint in a domestic situation.

Is it safe and is there an odour.

How much will I need for 36/m on new concrete.

What tools do I need.

Can a DIYer do this.

A.Domestic Use

Our products are solvent free, low oudor and inert when cured.


If you scroll down our home page to the bottom you will see a tab for colours.


You will require 2 x 5kg of Damp Proof Membrane for the primer on your new concrete.

2 x 5kg per coat of Epoxy Resin High Build Garage Floor paint in your chosen colour.

Ease of use

Anyone who is fairly handy can lay this Paint system. Full detailed instructions are provided and we are always here to help you as well.


You must use an Epoxy Roller Frame and Sleeves to apply for best results and better coverage.

Q. When can I paint new concrete?

A. By using our Resincoat DPM Epoxy Primer new concrete can be painted over after only 12 days curing depending on the curing conditions.

Q. Can I paint over old paint?

A. Provided you are certain that the paint will never lift from the surface the quick answer is yes for previously Epoxy painted floors. As a rule you should always get back to the original surface to ensure a good key for the new paint.

Q. What is Polyaspartic Paint.

A. Polyaspartic Epoxy Resin has been developed to dry cure within a given parameter, usually 1 hour. The surface is the ready for another coat. We are always avialable for free advice. Phone on +44 (0)1977 615662 or +44 (0)7882747298.

Q. 'The Epoxy Paint will I get away with one coat?

A. We strongly recommend that two coats are applied, idealy a Primer first.

Q. I have a concrete roof which is in poor condition what do you recommend for an inexpensive fast cure?

A. I personally have used our product Epoxy Resin DPM on the concrete roof of my store which was flooding every time it rained. 2 coats later dry as a bone.

Q. Can I use any paint roller to apply Epoxy Resin?

A. No. A special Epoxy Resin Roller and frame should be used because it is low fluff and made especially robust to withstand the pressures of rolling out the paint. We supply all such rollers and frames.

Q. I have a new Concrete Floor. How soon can I paint it and which of your products would I use.

A. We have deveoped a product which can be used on new concrete after only 12 days of curing. This is our Damp Proof Membrane which combines with the H2O molecules in the concrete to make a bond so that subsequent coats of paint can be applied without fear of seperation.

This can now be followed by Our High Build Range of Epoxy Paints and Anti Slip range.

Q. Will your paint go over floor Tiles.

A. Yes but if the tiles are glazed the glaze will have to be removed by sanding or other abrasive technique before applying an Epoxy Primer followed by one or two coats of Epoxy Resin Paint.

If you want to cover the tiles and get a smooth finish.-Abrade the tiles as before, apply a coat of Epoxy Resin and scatter with kiln dried sand, let it cure, brush off the access sand and apply at least 5-10mm or more of Cementitious Self Leveling Compond.

One dry apply an Epoxy Primer followed by Epoxy High Build or non slip in your chosen colour.

Q. I need an Antibacterial Paint that is hygenic and easy to clean.

A. We have designed and manufactured a range of Wall and Floor coatings specifically aimed at this application.

We use Silver Ion technology to produce a range of products that is antimicrobal antibacterial, hard wearing, durable and easy to clean. They come in a range of pleasing colours that relflect the accepted medical colour spectrum.