• On sale!
  • -50%
    HB Factory Floor Paint Bundle
    HB Factory Floor Paint Bundle
    HB Factory Floor Paint Bundle
    HB Factory Floor Paint Bundle
    HB Factory Floor Paint Bundle
    HB Factory Floor Paint Bundle
    HB Factory Floor Paint Bundle
    HB Factory Floor Paint Bundle

DESCRIPTION

Industrial Resin Floor Paint Kit

Our Factory Floor Paint has been rigorously designed and tested by our team of epoxy paint specialists in our UK factory. It is the only formula on the market that will give you the highest quality at an affordable price. The formula has been designed to be as easy to apply for the installer as possible, smooth flowing with maximum durability in a long-lasting finish.

Applying the paint shouldn't be taxing - we understand you want to minimise downtime and keep the factory moving. As a result our expert team are on hand Monday-Friday for advice on everything from pre-purchase to post application. Our team will be happy to answer any questions you may have no matter what your experience working with epoxy paint products is.

 

KIT QUANTITIES

See below the exact quantities for each product that is supplied in our factory floor paint kits:

100m2 Kit Contains 120m2 Kit Contains
5 x 5kg Primer  6 x 5kg Primer 
10 x 5kg Epoxy Factory Floor Paint 12 x 5kg Epoxy Factory Floor Paint
2 x Roller Frame 2 x Roller Frame
6 x Roller Sleeves 6 x Roller Sleeves
2 x Paint Scuttle 2 x Paint Scuttle
1 x Mixing Paddle 1 x Mixing Paddle
6 x Paint Brushes 6 x Paint Brushes
2 x Pair of Disposable Gloves 2 x Pair of Disposable Gloves

 

APPLICATION GUIDE

Preparation

Old paint finishes should be removed if flaking at all and the surface should be sanded to create a texture (also known as a mechanical key) prior to applying Resincoat Factory Floor Paint Bundle. When preparing for a floor coat, doing so mechanically (shot-blasting or grinding) is always advisable for best results, but if that is not possible then sanding the area or our Etch and Clean is a good alternative. After the surface has been completely abraded, thoroughly sweep and vacuum the area of any remaining dust or contaminants. For more information on preparation, please see technical data sheet. 

Please note: Etch and Clean is only suitable for use on bare concrete.

 

Priming

For new concrete floors or floors in good condition, prime with Resincoat Damp Tolerant Primer

For dusty, old or weaker floors prime with Resincoat Deep Penetrating Primer

For greasy floors with heavy oil residue clean thoroughly using a suitable degreaser scraping off any dust or dirt and then prime with Resincoat Oil Tolerant Primer

 

Application

We advise when applying this product the ambient temperature is at least 7°C.

1. Mix Part A on its own with a mixing paddle attached to an electric drill for about 1 minute before adding ALL of Part B and continue to mix for another 90 seconds, keeping the paddle in suspension to avoid mixing air into the unit.

2. Pour entirety of the tin's contents into a plastic paint scuttle or tray.

3. Immediately begin applying your paint with a nylon-bonded resin suitable roller.

4. Use a brush around the edges to cut in (a second pair of hands can be useful for this stage).

5. As soon as the first coat has started curing (is no longer tacky to touch) you can re-coat; this should take 12-24 hours.

6. The cured final coat is ok for foot traffic. Cars and heavy objects, however, should be left off the new coating for the first 48 hours and chemicals including water should not be introduced for the first 7 days (Full chemical cure).

 

PLEASE NOTE: The pot life of this product is 20 minutes. This means that once parts have been mixed, the paint will start to chemically cure after this time. Ensure you remove the paint from the tin in this window. The paint will then be workable on your floor for up to 40 minutes. 

Pot life = Time to harden in pot following addition of hardener

Working Time = Time to apply product before it becomes unworkable

 

USEFUL INFORMATION

Roller sleeves should be used once per coat, two coats will require two roller sleeves.

This product is NOT UV stable therefore can discolour when exposed to regular sunlight. For areas with plenty of repeated sunlight, please coat with a coloured UVR coating such as Resincoat Chemical Resistant UVR Floor Coating for a UV stable finish.

This product should NOT be split. Taking smaller quantities from each tin, even if measured correctly, may cause issues with activating.

This product is NOT self levelling.

If you require a clear epoxy coating visit our clear epoxy product here.

Please note: all Resincoat Bundles are sold as complete sets, individual units may not be returned or refunded.

FFP001

Data sheet

Appearance
Professional, High Gloss Finish
Composition
100% Solids
Substrates
Bare Concrete, Wood, Screeds, Steel
Product Components
Both Primer and Paint contain: Resin (Part A) + Activator (Part B)
Typical Installations
Factories, Warehousing, Picking/Packing Areas
Solvent Content
Solvent Free
Re-coat/Foot-traffic Time (at 20°C)
8-12 Hours
Drying Time (at 20°C)
12-24 Hours
Pot Life
The Pot Life Of This Product Is 20 Minutes
Application Tools
Roller Frames & Sleeves, Paint Scuttles, Mixing Paddle, Paint Brushes

Specific References

ean13
5056489440313
upc
500968845205

Download

Factory Floor Paint TDS

Download (1.18MB)

Colour Chart

Download (129.88KB)

Frequently Bought Together

16 other products in the same category:

Comments (7)
Reviews