Resincoat Cleaning Fluid is a gentle cleaning fluid for refreshing epoxy flooring systems, removing contaminants, stains and other dirt and grime from the surface until it is left like new. It is designed to be used to clean pre-coated flooring systems, handily removing grease and oil contamination, as well as dirt and stains from these flooring systems.
We expect one unit to be capable of cleaning a standard garage of around 40m2 if applied correctly, though this is subject to the porosity of the surface.
Preparation and Application
1. Pour Resincoat Cleaning Fluid into a suitable receptacle.
2. Apply to the affected stained/contaminated area.
3. Leave to rest for a few minutes to allow product to lift the dirt and stain from the coating.
4. Wipe down the area with a mop.
5. Wash the cleaning fluid off the surface with water and then allow to dry before recommencing traffic on the area.
We are currently unable to supply the protective face mask with this kit due the on-going COVID-19 situation. The item price has been adjusted accordingly.
Resincoat PPE Safety Pack is designed for wearing whilst applying epoxy paints and other resin based products that could be harmful if in contact with skin. The pack includes a high quality 'one size fits all' elasticated coverall suit, valved disposable face mask, safety glasses, corded ear plugs and disposable latex gloves.
Everything you need in one convenient pack
Ideal for applying epoxy products
One size fits all - suitable for any user
Tested & certified products
Hi-Vis jacket not included, image for illustrative purposes only.
Portwest Professional Cleaning Wipes are ideal for cleaning hands, tools and surfaces during the application of resin products. The wipes will remove wet paints and primers much more effectively than soap and water. They are also a great safe alternative to white spirits.
Suitable for hands and tools
Recommended for use by flooring installers
Great for paints, primers, oils and grease
Keep out of reach of children. Do not use on broken or damaged skin. Finish with a dry cloth for best results.
Will not remove cured resins or paints. Will not clean fibre brush heads or roller sleeves.
Resincoat geotextile tape will successfully strengthen and protect cracks, gaps, holes and perforations on roofing materials. This tape is recommended for use with Resincoat liquid rubber waterproof coating to reinforce large cracks and holes thoroughly insulating your surface and providing a long lasting, durable design. Each roll is 50mm x 90 linear metres in length.
Resincoat Pinhole Filler is an ultra-strong, lightweight multi-functional repair filler ideal for repairing small cracks, blemishes and pinholes in concrete, screeds, self-levelling layers, metals and resin coatings. Easy to use, the product cures quickly to high strengths while remaining easy to sand and abrade for further coating.
High resin content
Lightweight & smooth
Easy to mix, use & apply
Good adhesive strength
Specially formulated for easy sanding
All our resin products are proudly manufactured, tested and packed by Resincoat in the UK to the highest ISO9001 standards.
Resincoat Floor Degreaser is a versatile, hard floor cleaner and degreaser suitable for preparing oil or grease contaminated concrete floors for subsequent floor paints. Simply mix with water to required dilution and the highly concentrated degreaser will rapidly break down all tough grease, oil, petrol and dirt.