Experience the power of Resincoat Oil Tolerant Primer, a high-strength epoxy resin sealer designed to combat residual oil contamination in concrete substrates. This easy-to-apply solution creates an effective membrane, safeguarding your surfaces against the damaging effects of oil. Ideal for MOT bays, engineering workshops, and various warehouse and factory spaces, Resincoat Oil Tolerant Primer provides reliable protection in environments with high oil exposure. Use it as a primer for paint installations or as a dust-free sealer, ensuring a clean and durable finish.

With Resincoat Oil Tolerant Primer, you can bid farewell to the challenges of oil contamination. Its advanced formula forms a robust barrier that prevents oil penetration and guarantees long-lasting performance. Achieve a seamless, professional finish effortlessly, thanks to its user-friendly application process. Proudly manufactured by Resincoat in the UK, this primer guarantees high quality and performance.



Please see below for coverage rates. If you are coating a large area and would like expert advice, please call our team who will be happy to assist you.

1kg: 3-4m²

2.5kg: 8-10m²

5kg: 15-20m²

10kg: 35-40m²

Please note: the above coverage rates are dependant on the porosity of the surface.




Old paint finishes should be removed if flaking at all and the surface should be sanded to create a texture (also known as a mechanical key) prior to applying Resincoat Oil Tolerant Primer. When preparing for a floor coat, doing so mechanically (shot-blasting or grinding) is always advisable for best results, but if that is not possible then sanding the area or our Etch and Clean is a good alternative (Be advised: Etch and Clean should only be used on bare concrete). After the surface has been completely abraded, thoroughly sweep and vacuum the area of any remaining dust or contaminants. For more information on preparation, please see technical data sheet. 

Please note: Please note that if the substrate is heavily contaminated with large amounts of oil, additional preparation or cleaning may be required. We recommend use of Resincoat Degreaser.



We advise when applying this product the ambient temperature is at least 7°C.

1. Mix Part A on its own with a mixing paddle attached to an electric drill for about 1 minute before adding ALL of Part B and continue to mix for another 90 seconds, keeping the paddle in suspension to avoid mixing air into the unit.

2. Pour entirety of the tin's contents into a plastic paint scuttle or tray.

3. Immediately begin applying your paint with a nylon-bonded resin suitable roller.

4. Use a brush around the edges to cut in (a second pair of hands can be useful for this stage).

5. As soon as the first coat has started curing (is no longer tacky to touch) you can re-coat; this should take 12-24 hours.

6. The cured final coat is ok for foot traffic, and ready for subsequent coats of either primer or your first coat of paint.


PLEASE NOTE: The pot life of this product is 20 minutes. This means that once parts have been mixed, the paint will start to chemically cure after this time. Ensure you remove the paint from the tin in this window. The paint will then be workable on your floor for up to 40 minutes. 

Pot life = Time to harden in pot following addition of hardener

Working Time = Time to apply product before it becomes unworkable



Roller sleeves should be used once per coat, two coats will require two roller sleeves.

This product should NOT be split. Taking smaller quantities from each tin, even if measured correctly, may cause issues with activating.

This product is NOT self levelling.


Data sheet

Low Viscosity Epoxy Resin
Bare Concrete, Wood, Screeds, Steel
Product Components
Resin (Part A) + Activator (Part B)
Typical Installations
Anywhere Oil May Be Embedded In The Concrete. MOT Bays, Engineering Workshops And Many Other Warehouse And Factory Spaces
Solvent Content
Solvent Free
Re-coat/Foot-traffic Time (at 20°C)
8-12 Hours
Drying Time (at 20°C)
12-24 Hours
Pot Life
The Pot Life Of This Product Is 20 Minutes
Application Tools
Roller, Brush

Specific References



Oil Tolerant Primer TDS

Download (1.11MB)

Frequently Bought Together

9 other products in the same category:

Comments (0)