Metallic Epoxy Coating Sample Kit

Our metallic epoxy coating kit allows customers to create stunning marble and metallic flooring. The beauty of metallic is that every flooring will be completely bespoke. This sample kit offers the opportunity to have a feel for the metallic system as well as the application process. We always recommend using a sample kit before any large project so you can get a feel for the ratio of your desired colours and overall finish. There is a huge choice of colour combinations available that would look great in both domestic and industrial settings. 

 Kit Includes:

The sample kit covers 0.625m2. Please note the sample kit includes a 50:50 ratio of Colour 1 & Colour 2.
•    Resincoat Metallic Primer

•    Resincoat Epoxy Metallic Paint (1 x Epoxy & 1 X Hardener)

•    2 x Pigments

•    2 x Mixing Pots & Sticks

Application Guide:

Preparation-
Before applying our metallic coating ensure you test area is perfectly smooth, screening if necessary.  Old paint finishes should be removed if flaking at all and if well bonded abraded sanded to create texture prior to applying the paint. We also recommend you wipe the surface with white spirit as well as keying the area to ensure good adhesion.

 
Before applying our coating concrete must be:
•    Dry – no wet areas
•    Clean and dust free– containments removed
•    Smooth but open  - surface etched
•    Structurally sound – all cracks and damages repaired

Application –
We advise when applying this product the ambient temperature is at least 7 degrees ensuring there will be no precipitation in the area for a 12 hour period following application

1. Apply Resincoat base coat to the surface using a roller working your way out of the room

2. Leave up to 24 hours to fully cure

3. Mix part A slowly but thoroughly and leave to stand 10min before slowly adding part B

4. Carefully split the mixture in to the two pots

5. Immediately add each of your pigments to the 2 mixtures & stir thoroughly 

*It is critical you use your product immediately due to its 20 minute pot life. After that time the product will become unworkable.

6. Pour contents of each mixture decoratively on to your test area. You may wish to use a roller and squeegee to create your pattern 

7. Cure for 24 hours or when not tacky to touch

If you have any questions regarding application of this product please call our customer support team on 0113 827 2387 who will be able to offer help & further guidance.

Useful Information:

• Please note in some cases white or lighter coloured systems may experience minor discolouration.

For more information on colour options or technical detail we recommend calling us on 0113 827 2387 or using our live chat.