Everything you need in a concrete patch mortar in one ready to mix product.
All In One Epoxy Concrete Repair Mortar from Resincoat is the ultimate patch material for concrete repair. With a finish harder than concrete and extreme durablity this product is ideal for almost any repair job. The formula has been designed with the end user in mind. Rapid curing and no extra cost. Professional finish and very easy to use. We recommend use of Resincoat Tack Coat in addition to this product. All in One Mortar is supplied as a pack. Contents include mortar mix, resin and activator.
Warning: Last items in stock!
|Size||5kg, 10kg, 25kg|
|Product Name||All In One Epoxy Repair Mortar|
|Composition||Mortar Mix, Hardener & Activator|
|Technical Data||See technical data sheet at bottom of page|
|Coverage||approx. 1.2m² per 10kg at 5mm thick|
Resincoat All In One Epoxy Repair Mortar does it all whether you are repairing steps, fixing up pot holes in damaged road surfaces or even securing bedding anchors and railling posts. Complete with activator and resin the All In One kit gives you everything you need for a professional finish on almost any concrete surface.
Our formula allows easy application making this the perfect choice for the DIY user whilst also maintaining the strength, quality and reliablity for our professional customers with great chemical resistance and anti-slip for both industrial and commercial environments.
Make sure the damaged surface has been cleaned out of all loose material.
If necessary apply Resincoat Tack Coat Primer
Mix together parts A & B for a minimum of 90 seconds.
Add part C and mix again for a further 90 seconds.
Apply with a steel float or trowel
Note: product has a pot life of 30 minutes at 20°C. Once mixed, use immediately.
*Not resistant to certain acids such as sulphuric, battery etc. For this type of application see CTR018 Acid Resistant Repair