This coating has been developed to replace whiteboards. Bespoke whiteboards are expensive and alternatives only last a short while before they become marked permanently.

Resincoat's solution is simple, using our newly formulated Write On, Wipe Off wall coating, design the board size yourself, simply mark out the board area and apply the coating. Leave for one day whilst the tough plastic coating cures and then use as a ‘normal whiteboard’ - No fixtures or fittings needed! The result is a washable, whiteboard effect paint that you can easily write on and wipe off. 

• Produce your own bespoke white board at a fraction of the cost!

• Easy to apply - two coats are recommended but this coating covers up to 8m² per 1kg!

• Very tough paint coating and washable with regular board wipes

• Available with an anti-bacterial option

Note: For best cleaning results consider Resincoat Whiteboard Cleaning Spray.

Resincoat PRS Penetrating Epoxy System is a clear, solvent-free, low viscosity epoxy resin formulation that acts as a penetrating sealer and binder for strengthening and restoring poorly compacted or low strength screeds or concretes. This system penetrates deep into the substrate, filling voids and consolidating loose particles. This is a two part unit with pre-weighed resin and activator. 

• Easy To Mix & Apply

• 2 Part Epoxy System

• Maximum Sealing & Binding for Weak Floors

• Superb Coverage

Resincoat Antimicrobial floor paint is a heavy-duty epoxy resin ideal for coating highly trafficked areas where antibacterial properties are of paramount importance. Manufactured in the UK the coating offers a high quality epoxy resin formula that will last for many years. The coating boasts fast, effective, antimicrobial protection for the lifetime of the product. 

• Antimicrobial Protection

• Effective against MRSA

• Destroys other types of microorganisms such as fungi & mould

• 100% Solids

• Incredibly durable and easy to clean

• Low VOC and Solvent Free

  
  

Get a quote for your commercial project

This product has been independently tested to ISO 22196 and given accreditation from Biomaster, the UK's leading provider of antibacterial agents.

Resincoat Waterproof Tanking Paint is a versatile two part polyurethane coating for all surfaces. This can be used as an easy-to-apply alternative to tanking slurry. This tanking paint has very good abrasion and chemical resistance, as well as waterproof and damp proof properties, to provide an ideal coating that can be applied to vertical areas as well as flat surfaces. This paint can achieve a waterproof seal with just one coat at incredibly low thickness and has excellent damp-proof properties as well as offering an attractive final appearance.

• Easy alternative to tanking slurry

• Fully waterproof in one thick coat

• High chemical resistance

• Usable as a damp proof paint

• Suitable for internal or external use

Resincoat fast cure epoxy crack repair filler is the ideal solution for rapid repairs to cracks. This high strength formula is easy to apply with its DIY friendly pourable design, resulting in fine cracks and small voids being quickly repaired. Boasting a rapid 4 hour cure time, this product is great for repairs that require a quick turnaround. Use year round this product offers a high quality, professional finish. 

• Rapid 4 hour cure time

• Cures stronger than concrete

• Ideal for quick repairs

• DIY friendly

• Cures in cold temperatures

• High quality UK manufactured resin

Resincoat Factory Floor Paint Bundle gives you everything you need to create a professional resin system in a factory or industrial space of up to 100m² or 120m². You will receive our best selling HB Factory Floor Paint, primer of your choosing, anti-slip option and full accessory kit designed to make application as smooth as possible.

• High Build Professional Finish

• Heavy Duty - Suitable for forklift & vehicular traffic

• Solvent Free - Unlike cheaper epoxy floor paints

• Ready to use in just 24 hours

• Highly attractive gloss finish

Resincoat Asphalt Crack Repair is an ultra-strong, pourable epoxy resin liquid is the ideal solution to penetrate and seal fine asphalt cracks. It offers excellent waterproofing and sealing properties making it ideal for use on roads, car parks, driveways and other surfaces.

• Easy to Apply

• Sets Stronger than Concrete

• Can be applied over a wide range of temperatures

• Ideal for asphalt cracks up to 2cm deep 

• 100% Epoxy Formula - Solvent Free

Resincoat Roof Sealer & Waterproof Coating is the best way to seal and waterproof a damaged concrete roof. The formula will adhere to the splits and cracks in the roof leaving a waterproof finish that protects against leaks. The paint can be applied onto many types of roof materials making it flexible for almost any roof repair job.

• Repairs & seals leaking roofs
• Solvent & VOC free
• Superb sealing qualities
• Heavy duty polyurethane
• One coat required, two if desired

Resincoat Polyurea Joint Sealant is a high quality, flexible polyurea sealer that can easily fill joints and cracks in concrete and other surfaces. Fast curing make it ideal for applications that rely upon a quick turnaround. This sealant works well in adverse temperatures & is highly flexible allowing slab movement, yet strong enough to prevent spalled joints under heavy pressure.

This product requires the following application gun:
Dual Cartridge Application Gun

• Easy gun application
• Quick initial cure time (around 5 minutes)
  
• Low VOC & Solvent Free
• Cures in temperatures from -25 to +54°C
• Great chemical resistance

Resincoat geotextile tape will successfully strengthen and protect cracks, gaps, holes and perforations on roofing materials. This tape is recommended for use with Resincoat liquid rubber waterproof coating to reinforce large cracks and holes thoroughly insulating your surface and providing a long lasting, durable design. Each roll is 50mm x 90 linear metres in length.

• Strengthens & protects
• Highly durable design
• Cost effective solution
• Easy application
• 50mm x 90m

You May Also Need:

Resincoat Liquid Rubber Waterproof Coating

Resincoat Fast Cure Epoxy Primer is ideal for fast turnaround flooring projects. The primer rapidly cures in 3 hours, at 20°C, allowing you to prime and paint the floor in 1 day. The primer is suitable for sound concrete protecting and sealing your surface ready to paint. By using a primer you improve the coverage of your top coat, as well as improving the durability of your epoxy floor paint.

• Ideal for use with Resincoat Fast Cure Garage Floor Paint

• Excellent adhesion & sealing qualities

• UK Manufactured

• High strength formula
  

• Oil tolerant

• Superb coverage

Spiked Shoes are designed to fit all feet sizes and to allow the user to walk over freshly painted or screeded surfaces without leaving footprints and ruining the finish of the floor. These shoes will bleed air in the same way a spiked roller would.

Resincoat Floor Degreaser is a versatile, hard floor cleaner and degreaser suitable for preparing oil or grease contaminated concrete floors for subsequent floor paints. Simply mix with water to required dilution and the highly concentrated degreaser will rapidly break down all tough grease, oil, petrol and dirt.

• Diluent & Solvent Free

• Ideal for garage floors

• Recommended for use by flooring installers

• Oil & Petrol Spill Resistant

Resincoat Spiked Roller with Frame is an industrial grade spiked roller which is essential when using self levelling compounds and other screeding products on your floors or surfaces. The roller helps get rid of air pockets in Resincoat products and aids the leveling process.

Resincoat antimicrobial anti slip floor paint is a high strength epoxy formula that is incredibly durable. Ideal for use on high traffic hospital floors and areas where slip prevention and antimicrobial properties are of equal importance. The anti slip profile is available in fine, medium or coarse providing excellent slip resistant on both wet & dry surfaces.

• Professional Slip-Resistant Finish

• ≥99.9% Kill Rate of Bacteria

• Surface Usable in 24 hours

• Available in Fine (0.4mm), Medium (0.8mm) or Coarse (2mm) Aggregate Sizes.

• Superb Coverage

• Low VOC and Solvent Free

Get a quote for your commercial project

Resincoat Heavy Duty Anti-Slip Ramp Paint is a high strength two-coat system designed to provide long lasting slip resistance to ramps and walkways. This coating is perfect for regular pedestrian traffic but also wheeled traffic, making it a great choice for wheelchair accessibility ramps. Manufactured in the UK the paint boasts a long lasting professional finish.

• High quality epoxy resin

• Choice of anti slip profiles

• Highly durable design

• Choice of colours

• Easy to apply with limited dripping