DIY Friendly Exterior Masonry Paint

Resincoat Masonry Paint is a great way to restore your home's exterior walls. Choose from a great range of on trend colours allowing you to brighten up the street, instantly reviving any tired or shabby looking brickwork. Our paint is exceptionally diverse and boasts superb coverage, making it ideal for renovating your full house or adding new life to a garden wall. This highly durable formula has been manufactured to provide great resistance to all weather conditions, providing a tough film protecting your render or brickwork.

Environmentally friendly and free from toxins the paint offers a highly attractive matt finish once dry. This coating is ideal for a wide range of substrates including brickwork, render and cement. Our paint gives you full peace of mind that your home is protected, offering fantastic weatherproofing properties lasting for many years.



Please see below for coverage rates. If you are coating a large area and would like expert advice, please call our team who will be happy to assist you.

5kg: 35-50m² (depending on the porosity of the surface)

Please note: the above coverage rates are per coat, in most cases we advise 2 coats, especially if painting on cements posts or gravel boards.




Old paint finishes should be removed if flaking at all and the surface should be sanded to create a texture (also known as a mechanical key) prior to applying Resincoat Masonry Paint. Use a wire brush to remove any dirt from the surface of your wall. Most concrete or other monolithic surfaces require no primer before application of Resincoat Masonry Paint. After the surface has been completely abraded, thoroughly sweep and vacuum the area of any remaining dust or contaminants. For more information on preparation, please see technical data sheet. 

Important: Apply only in dry conditions - ideally the coating should avoid rainfall for 2 days where possible.



We advise the weather be dry and warm whilst applying this product, but not overly humid.

1. Stir the paint thoroughly before use.

2. Apply your first coat with a brush or roller (start at the corner of painting area and working inwards).

3. Leave to dry for between 4 to 6 hours.

4. Apply your second coat (two coats are recommended).

5. If you have paint remaining, the tin can be re-sealed and stored for further use.


Please note: When working with Resincoat Masonry Paint, it is possible for you to wash your tools, brushes and rollers with warm, soapy water once you have completed your project.



Be advised: Do not apply the product in damp, humid or extreme temperatures.


Data sheet

Attractive Matt Finish
UV-Stable Acrylic Formula
Product Components
One-Pack System
Typical Installations
external walls of houses, garages and other outdoor stone or masonry
Re-coat/Foot-traffic Time (at 20°C)
4-6 Hours
Drying Time (at 20°C)
8 Hours
Application Tools
Roller, Brush, Pad

Specific References



Masonry Paint TDS

Download (384.51KB)

Colour Chart

Download (130.06KB)

Frequently Bought Together

16 other products in the same category:

Comments (3)