The express installation garage floor paint bundle is ideal for customers who are looking for a one day install for their garage floor. Perfect for quick turnaround projects or flooring contractors who wish to complete the job in one day. This kit contains a quick cure primer and a quick cure epoxy base coat, boasting a 3 hour and 4 hour re-coat time, at 20°C, respectively. This is followed by a final topcoat of our standard epoxy, allowing you to complete the job same day, as opposed to our standard bundles which take up to 3 days.

Incredibly easy to apply, the formula uses the highest quality epoxy resin proudly manufactured in the UK. All our resin products are manufactured in our West Yorkshire factory offering high quality performance and durability. The bundle is offered in a great choice of colours with each providing a stylish high gloss finish to your floor. Our epoxy resin is incredibly hardwearing and is up to 5x thicker than standard garage floor paints. 


Included in the Kit:

  • 1 Coat Fast Cure Primer
  • 1 Coat Fast Cure Epoxy
  • 1 Coat Epoxy Garage Floor Paint (Topcoat)
  • Roller Frame
  • Paint Scuttle
  • Mixing Paddle
  • Roller Sleeves
  • Paint Brushes
  • Pair of Disposable Gloves

Please note: These are relative quantities and the product amounts are dependent on your selected coverage. 




Old paint finishes should be removed if flaking at all and the surface should be sanded to create a texture (also known as a mechanical key) prior to applying Fast Cure Garage Floor Paint Bundle. When preparing for a floor coat, doing so mechanically (shot-blasting or grinding) is always advisable for best results, but if that is not possible then sanding the area or our Etch and Clean is a good alternative. After the surface has been completely abraded, thoroughly sweep and vacuum the area of any remaining dust or contaminants. For more information on preparation, please see technical data sheet. 

Please note: Etch and Clean is only suitable for use on bare concrete.



We advise when applying this product the ambient temperature is at least 7°C.

1. Mix Part A of the primer on its own with a mixing paddle, attached to an electric drill, for about 1 minute. Once mixed, adding ALL of Part B and continue to mix for another 90 seconds, keeping the paddle in suspension to avoid mixing air into the unit.

2. Pour entirety of the tin's contents into a plastic paint scuttle or tray.

3. Immediately begin applying your primer (or paint) with a nylon-bonded resin suitable roller.

4. Use a brush around the edges to cut in (a second pair of hands can be useful for this stage).

5. As soon as the primer (or paint) has started curing (is no longer tacky to touch) you can apply your first coat of paint; this should take 3 hours at 20°C.

6. Repeat steps 1-5 for your first coat of fast cure epoxy garage floor paint. This time, waiting for 2-4 hours at 20°C, before applying the top coat. 

6. Repeat steps 1-5 for the top coat of Standard Epoxy Garage Floor Paint. This should cure between 12-24 hours.

7. The cured final coat is ok for foot traffic. Cars and heavy objects, however, should be left off the new coating for the first 48 hours and chemicals, including water, should not be introduced for the first 7 days (Full chemical cure).


PLEASE NOTE: The pot life of this product is 20 minutes. This means that once parts have been mixed, the paint will start to chemically cure after this time. Ensure you remove the paint from the tin in this window. The paint will then be workable on your floor for up to 40 minutes. 

Pot life = Time to harden in pot following addition of hardener

Working Time = Time to apply product before it becomes unworkable



Roller sleeves should be used once per coat, two coats will require two roller sleeves.

Please note: direct sunlight may cause the coating to discolour, for areas exposed to sunlight we recommend the use of our Polyaspartic Fast Cure Coating.

This product should NOT be split. Taking smaller quantities from each tin, even if measured correctly, may cause issues with activating.

This product is NOT self levelling.

Please note: all Resincoat Bundles are sold as complete sets, individual units may not be returned or refunded.


Data sheet

Professional, High-Gloss Finish
100% Solids
Concrete Garage Floors, Stone, Cement, Asphalts, Most Smooth Surfaces.
Product Components
Primer & Paint: Resin (Part A) + Activator (Part B)
Typical Installations
Specifically designed for a garage on a quick turnaround
Re-coat/Foot-traffic Time (at 20°C)
Primer: 3 Hours | Paint: 2-4 Hours
Drying Time (at 20°C)
Primer: 2.5 Hours | Paint: 12-16 Hours
Pot Life
Primer & Paint: 20 Minutes
Application Tools
Roller, Brushes

Specific References



Express Garage Floor Bundle TDS

Download (433.63KB)

Colour Chart

Download (129.88KB)

Frequently Bought Together

16 other products in the same category:

Comments (0)