Our metallic epoxy surface coating kit has been specially formulated by our chemists allowing you to create stunning decorative surfaces. The beauty of metallic is that it offers infinite opportunities to create a unique colour combination that would blend seamlessly into your existing home or commercial setting. Our 2 colour options allow you to mix and combine any colour combination to create beautiful marble effects with each finish being truly unique. The smooth high gloss finish exudes style and is also extremely easy to clean and maintain.

Easy to install the metallic coating kit can be applied using standard DIY techniques along with our expert guidance saving you time and money. Any surface that is stable and has a porous surface can be transformed including wood, concrete, plastic and more (surface has to be perfectly smooth no tiles or grouts, joints can be visible). Metallic systems are great for creating eye catching floors and can also be used to transform worktops, outdoor planters and other surfaces into a striking focal point.  These systems are incredibly durable making them ideal for heavy traffic in commercial settings such as restaurants, nightclubs, showrooms and workshops.


See below the exact quantities of each product that are supplied in our Metallic Epoxy Floor Coating Kit:

10m2 Kit Contains

  • 1 x 2.5kg Resincoat Metallic Primer (Choice of Colour)
  • 2 x 4kg Resincoat Metallic Epoxy (Already Pigmented)
  • 1 x 1kg Single Pack Top Coat (Gloss, Satin or Matt)

20m2 Kit Contains

  • 1 x 5kg Resincoat Metallic Primer (Choice of Colour)
  • 4 x 4kg Resincoat Metallic Epoxy (Already Pigmented)
  • 1 x 2kg Single Pack Top Coat (Gloss, Satin or Matt)

30m2 Kit Contains

  • 1 x 2.5kg Resincoat Metallic Primer (Choice of Colour)
  • 1 x 5kg Resincoat Metallic Primer (Choice of Colour)
  • 6 x 4kg Resincoat Metallic Epoxy (Already Pigmented)
  • 1 x 2kg Single Pack Top Coat (Gloss, Satin or Matt)
  • 1 x 1kg Single Pack Top Coat (Gloss, Satin or Matt)


 Recommended Tools:

  • Paint Roller Frame
  • 12" Paint Roller Sleeves
  • Paint Brushes
  • Paint Scuttle (for the primer and top-coat) 
  • 5l Mixing Paddle
  • Disposable Gloves 
  • Spiked Shoes 




Before applying our metallic coating ensure floor is perfectly smooth, screeding if necessary. Old paint finishes should be removed if flaking at all and, if too smooth, the flooring should be sanded to create texture (also known as a mechanical key) prior to applying Metallic Epoxy Floor Coating Kit. Preparing the floor mechanically (shot-blasting or grinding) is always advisable for best results, but if that is not possible then sanding the area or our Etch and Clean is a good alternative. After the surface has been completely abraded, thoroughly sweep and vacuum the area of any remaining dust or contaminants. For more information on preparation, please see technical data sheet.

Please note: Etch and Clean is only suitable for use on bare concrete.



We advise when applying this product the ambient temperature is at least 7°C.

1.    Apply Resincoat base coat to the surface using a roller, working your way out of the room.

2.    Leave up to 24 hours to fully cure.

3.    The metallic pigment and part A come premixed but pigment may settle, mix part A slowly but thoroughly and leave to stand 10min before slowly adding part B for colour 1 and mixing together with part A.

4.    Pour content completely across your floor in a decorative pattern (be sure to hold the bucket low to the floor to avoid any splashing)

5.    Repeat steps 3 & 4 for colour 2 and pour your second colour completely across your floor in a decorative pattern.

6.    Use a roller or squeegee (squeegee not included) to create your pattern, evenly distributing the product across your floor  *Please note: this is not the only way to apply, please call our technical team for advice on other techniques.

7.    Cure for 24 hours or when not tacky to touch.

8.    Apply Resincoat polyurethane UVR top coat with a roller.

Please note: you may wish to further sand down in between coats for the ultra-smooth finish.  Please refer to the datasheet for additional advice on application.

* We do not recommend the use of a heat gun /solvent spray with our metallic epoxy kit.



Roller sleeves should be used once per coat, two coats will require two roller sleeves.

Please note: pearlescent colours change dependent on lighting conditions and interference. For more information on colour options or technical detail we recommend calling us on 0330 0570 695 or using our live chat..

This product should NOT be split. Taking smaller quantities from each tin, even if measured correctly, may cause issues with activating.

This product is NOT self levelling.

Be advised: in some cases, white or light colour systems may experience minor discolouration.


Data sheet

10m², 20m² or 30m² (Larger sizes can be arranged on quotation)
Primer Required
Yes (Supplied in kit)
Product Name
Metallic Epoxy Resin Floor Coating Kit
Marble-effect, metalic finish
600-800 microns per thick single coat
Concrete, wood, cement based floors and more
Technical Data
UV Resistant
Entrance ways, showrooms, hotel lobbies, home use, function rooms & event flooring

Specific References



Metallic Mid Coat TDS

Download (473.48KB)

Metallic Primer TDS

Download (475.34KB)

Waterbased Metallic Topcoat TDS

Download (418.1KB)

Metallic Colour Chart

Download (3.87MB)

Frequently Bought Together

16 other products in the same category:

Comments (8)