£22.49 ex VAT.
Resincoat Clear Epoxy Coating is an ideal solution for coating and sealing concrete floors in domestic and industrial settings. It is also frequently used on worktops and displays as a protective coating. This coating boasts a clear, high gloss design that exhibits the highest strength, whilst offering a professional finish for both DIY and professional users alike. It is resistant to dirt, grease and oil and when dry the product creates a clear, dust free finish.
Get a quote for your commercial project
Also Available:
Exposed concrete flooring can be a feature in many establishments including art galleries, hotels, and warehouses as well as in your home where anything but a clear sealer could spoil the intricate detailing, therefore our clear epoxy concrete floor paint is the perfect solution. As a finish exposed concrete flooring can offer an industrial, modern feel that when combined with our clear epoxy can create a durable design lasting for many years. This clear coating can provide a highly durable sealant that will protect your substrate from light and heavy foot traffic as well as being chemical resistant.
Our clear epoxy paint can also be used as a final coating on our High Build coloured paints with the clear coat acting as a sacrificial layer that protects the underlying colour coat, great for heavy duty vehicular traffic. The clear coating will add a further layer of protection to this already durable paint ensuring your coloured coating does not fade or wear.
Please see below for coverage rates. If you are coating a large area and would like expert advice, please call our team who will be happy to assist you.
1kg: up to 5m²
2.5kg: up to 12.5m²
5kg: up to 25m²
10kg: up to 50m²
Please note: the above coverage rates are per coat, in most cases we advise 2 coats.
Old paint finishes should be removed if flaking at all and the surface should be sanded to create a texture (also known as a mechanical key) prior to applying Resincoat Clear Epoxy Floor Paint. When preparing for a floor coat, doing so mechanically (shot-blasting or grinding) is always advisable for best results, but if that is not possible then sanding the area or our Etch and Clean is a good alternative. After the surface has been completely abraded, thoroughly sweep and vacuum the area of any remaining dust or contaminants. For more information on preparation, please see technical data sheet.
Please note: Etch and Clean is only suitable for use on bare concrete.
• For new concrete floors or floors in good condition, prime with Resincoat Damp Tolerant Primer
• For dusty, old or weaker floors prime with Resincoat Deep Penetrating Primer
• For greasy floors with heavy oil residue clean thoroughly using a suitable degreaser scraping off any dust or dirt and then prime with Resincoat Oil Tolerant Primer
We advise when applying this product the ambient temperature is at least 7°C.
1. Mix Part A on its own with a mixing paddle attached to an electric drill for about 1 minute before adding ALL of Part B and continue to mix for another 90 seconds, keeping the paddle in suspension to avoid mixing air into the unit.
2. Pour entirety of the tin's contents into a plastic paint scuttle or tray.
3. Immediately begin applying your paint with a nylon-bonded resin suitable roller.
4. Use a brush around the edges to cut in (a second pair of hands can be useful for this stage).
5. As soon as the first coat has started curing (is no longer tacky to touch) you can re-coat; this should take 12-24 hours.
6. The cured final coat is ok for foot traffic. Cars and heavy objects, however, should be left off the new coating for the first 48 hours and chemicals including water should not be introduced for the first 7 days (Full chemical cure).
PLEASE NOTE: The pot life of this product is 20 minutes. This means that once parts have been mixed, the paint will start to chemically cure after this time. Ensure you remove the paint from the tin in this window. The paint will then be workable on your floor for up to 40 minutes.
Pot life = Time to harden in pot following addition of hardener
Working Time = Time to apply product before it becomes unworkable
• Roller sleeves should be used once per coat, two coats will require two roller sleeves.
• This product is NOT UV stable therefore can discolour when exposed to regular sunlight. For areas with plenty of repeated sunlight, please coat with a coloured UVR coating such as Resincoat Chemical Resistant UVR Floor Coating for a UV stable finish.
• This product should NOT be split. Taking smaller quantities from each tin, even if measured correctly, may cause issues with activating.
• This product is NOT self levelling.
Data sheet
Specific References
Resincoat Clear Epoxy Coating is an ideal solution for coating and sealing concrete floors in domestic and industrial settings. It is also frequently used on worktops and displays as a protective coating. This coating boasts a clear, high gloss design that exhibits the highest strength, whilst offering a professional finish for both DIY and professional users alike. It is resistant to dirt, grease and oil and when dry the product creates a clear, dust free finish.
Get a quote for your commercial project
Also Available:
Paint Mixing Paddle
This medium duty mixing paddle is capable of mixing paint, coatings, sealers and light mortars.
Resincoat Epoxy Resin Roller Sleeve is expertly crafted from thermo-bonded nylon & stands resilient against chemicals that typically harm roller sleeves. It's the ideal choice for projects involving solvent-based materials and 2-component paints, such as our epoxy and polyurethane resins. With precision application, exceptional durability, and compatibility with our own resin products, this versatile roller sleeve ensures professional-quality results, always.
Reusable 12 inch roller cage for floor paint and sealer application. To be used with a standard mop handle, not included with this product.
Resincoat Clear Polyurethane UVR Coating is a clear UV resistant coating often used as a protective topcoat for new epoxy and polyurethane paints. This formula is thinner than our epoxy coatings and suitable for both floors and walls. High durability and abrasion resistance means this coating will ensure a long lasting finish.
Resincoat penny floor epoxy is a clear epoxy resin ideal for creating coin cast flooring or penny floor designs. The epoxy resin will set clear with a smooth, attractive finish which really brings out the coins underneath. This formula is designed to provide a clear, protective finish to protect the material underneath.
Resincoat Masonry Paint is a high quality exterior house paint suitable for almost any external wall surface. Ideal for coating brick or stone, our formula is designed to provide a weather resistant finish that will resist dirt and mould and be fully rain proof. Our flexible and durable paint will cover fine cracks and imperfections leaving a flawless coloured finish.
Resincoat Anti-Slip Step Paint is a high strength coating to provide long lasting slip resistance to stairs and steps. This complete non-slip stair paint system withstands regular and high pedestrian traffic. Works well even when applied onto the stair riser with limited dripping. Manufactured in the UK, the epoxy formula is high strength and will last for many years.
Resincoat have pioneered an antimicrobial floor paint that has been tested and certified to kill Coronavirus. Our coating is the first on the market to be independently tested & certified to kill Coronavirus. This product helps prevent the spread of coronavirus by continually killing the virus 24 hours a day and unlike other products remains active throughout the lifetime of the coating (up to several years).
Find out how our Covid-19 Resistant Coating could help your business with our business solutions guide.
Resincoat Hygienic Kennel & Cattery Paint is a heavy-duty epoxy resin floor coating designed for highly trafficked areas where contact with animals is highly likely. Our formula is animal safe, antibacterial and exhibits the highest strength whilst offering smooth, attractive gloss finish. Our coating has been used in animal centres throughout the UK and proven to be a long-lasting, effective solution to floor coating this type of space.
Resincoat Chemical Resistant UVR Floor Paint is a highly chemical resistant, high solids, polyurethane floor coating with UV stability. This two-part industrial floor paint has been designed to provide excellent chemical resistance whilst maintaining a hard wearing performance in a variety of applications.
Resincoat Oil Tolerant Primer is a clear, easy-to-apply, high strength epoxy resin sealer designed to provide an effective membrane against residual oil contamination in concrete substrates. This product can be applied in wide range of environments where there has been high exposure to oil leading to residual contamination. These conditions are common to MOT bays, engineering workshops and many other warehouse and factory spaces. This primer is ideal for use prior to the application of Resincoat Epoxy Garage Floor Paint.
Resincoat Express Installation Garage Floor Paint Bundle offers a 1 day installation, providing a quick turnaround on flooring projects. The kit contains Resincoat quick cure primer, coat 1 of quick cure epoxy and a topcoat of standard epoxy, offering a long lasting high gloss finish. The paint is incredibly durable and can withstand heavy foot and vehicle traffic.
Resincoat Brewery Floor Coating has been designed, tested and manufactured specifically for the brewing and micro-brewing industry. The two-part epoxy paint is ultra-durable and spill resistant which fully protects your concrete flooring. The formula is very easy to clean, saving you time and keeping your brewing unit in excellent condition.
Ultra Durable
Chemical Resistant
Sugar Resistant
Easy to clean
Surface Usable in 24hrs
17-20m² Coverage rates per 5kg
Low VOC and Solvent Free
Resincoat Clear Polyurethane UVR Coating is a clear UV resistant coating often used as a protective topcoat for new epoxy and polyurethane paints. This formula is thinner than our epoxy coatings and suitable for both floors and walls. High durability and abrasion resistance means this coating will ensure a long lasting finish.
Resincoat Acid Resistant Floor Coating is a high build epoxy coating designed to have excellent resistance against aggressive acids, solvents and alcohols. As well as excellent acid and chemical resistances, this coating provides a tough and durable industrial finish that will withstand heavy use with ease.
Resincoat Epoxy Showroom paint is a high quality two part epoxy resin floor coating that offers a stunning professional finish. Boasting a high gloss design that will create a stylish, elegant feel in any showroom, exhibition space or gallery the paint will ensure your space is always looking its best. Designed to provide very good abrasion resistance the coating is exceptionally durable lasting for many years.
Resincoat Metal and Wood Primer is a low viscosity solvent free Epoxy Primer used to seal and prepare metal and wood surfaces for the subsequent application of resin paint systems. The primer is specially designed to ensure superb quality adhesion between resin paint and metal or wood substrates. This product will make an ideal base coat on metal or wood surfaces to ensure future paint coatings will adhere correctly.
Resincoat Deep Penetrating Epoxy Primer is for use on damaged, friable and weak floors or where deep penetration of the substrate is required to act as a barrier. This primer is specially formulated to go into the substrate and bind the weak cementitious material together before adding a top coat. 1 coat is sufficient prior to using one of our paint finishes. For very weak floors, which may need deeper penetration, please see our Heavy Duty PRS Penetrating System.
Resincoat Weatherguard Paint is an exterior wall coating that provides excellent UV stability and a protective shield from all weather conditions. This coating is recommended as a house paint or for painting external walls of buildings. Weatherguard will naturally restrict plant growth which will reduce persistent maintenance problems such as moss growth.
Resincoat Weatherguard Extreme (Clear) is an exterior masonry paint that provides excellent UV resistance which can be applied at sub-zero temperatures.
This product is the fastest, safest coating system on the market for walls. It is solvent free, UV stable and has been designed to replace MMA systems, which are currently being phased out due to their associated high odour.
Resincoat Reflective Line Marking Paint is a chlorinated rubber based heavy duty line marking paint ideal for use on concrete, asphalt or tarmac. Quick drying and extremely tough this item is a cost effective solution whilst offering a high strength formula. It contains reflective glass beads to create a bright, bold appearance that will reflect any lines or markings on your surface.
