There are 16 products.
Active filters
Resincoat Aggregate is a kiln-dried silica sand which when added to paint gives it anti-slip properties. It is available in a range of grades to provide varied slip resistance as per user requirements. Resincoat Aggregate silica can be added to any of our floor paints and coatings, and even some screeds or mortars to improve the level of slip resistance achieved underfoot.
Resicove Polyurethane Coving Mortar is the best way to create coved skirting on your concrete floors. The system will cure harder than concrete ensuring a smooth, impact resistant finish that will stand the test of time. Resicove is suitable for use both indoors or outdoors, impervious and dust free, making it ideal for new build flooring.
UberSeal Renovation Plaster is a premium, lightweight, cement-based solution, expertly pre-mixed and enhanced with perlite. Designed to combat dampness in the walls of older structures, it can be applied shortly after the insertion of a new DPC, or used in tandem with our UberSeal Tanking Slurry.
A superior 3mm Mesh Membrane crafted for moisture barrier applications on above-ground walls. The mesh offers a superb adhesive base for either dot and dab plasterboard application or direct rendering.
Featuring a studded profile of 20mm thickness, UberSeal 20mm Floor Membrane boasts the most substantial drainage capability within the UberSeal range. It possesses a void volume of 14 litres per square meter of membrane, ensuring unparalleled efficiency in water management solutions.
All-in-One Epoxy Concrete Repair Mortar from Resincoat is the ultimate patch material for concrete repair. With a finish harder than concrete and extreme long-life durablity this product is ideal for almost any repair job such as road repair or fixing pot holes. The three-part formula has been designed with the end user in mind allowing you to get the job done quickly, with a professional finish.
| Bulk Discounts - save up to 15% extra | |
| Quantity | Discount |
| 6+ | 5% |
| 16+ | 10% |
| 26+ | 15% |
| Call our office to redeem your discount on 0330 0570 695 | |
Resincoat Rapid Set is the fastest curing epoxy repair mortar on the market. Developed in the Resincoat laboratory, this mortar is unique in that it offers fully trafficable repair in just two hours, even at low temperatures. The product is a three-component resin and aggregate that is ideal for time critical repairs to damaged concrete floors and potholes.
| Bulk Discounts - save up to 20% extra | |
| Quantity (tins) | Discount |
| 6+ | 5% |
| 16+ | 10% |
| 26+ | 15% |
| Call our office to redeem your discount on 0330 0570 695 | |
Resincoat Deep Fill Epoxy Concrete Repair Mortar is perfect for larger potholes and deep cracks in concrete surfaces. The material is easy to apply and will cure harder than the concrete around it. This formula is designed to be suitable both indoor and out and therefore is perfect for repairing concrete in warehouses, car parks, staircases and more.
| Bulk Discounts - save up to 20% extra | |
| Quantity (tins) | Discount |
| 6+ | 5% |
| 16+ | 10% |
| 26+ | 15% |
| Call our office to redeem your discount on 0330 0570 695 | |
Our premium waterproofing membrane, UberSeal 8mm Mesh Membrane, is suitable for direct rendering or dot and dab finishes in basement applications, standing out as one of the toughest and thickest high-quality meshed membranes available, offering a waterproofing solution of unparalleled durability and performance.
£137.25 ex VAT.
An all-in-one bundle designed around UberSeal 8mm Mesh Membrane, a premium cavity drain waterproofing membrane, designed for internal use both above and below ground level. Engineered to protect finishes from damp or wet walls. It is suitable for damp proofing and waterproofing applications.
Sample Product
Resincoat Outdoor Patio Paint is the perfect product to brighten up your outdoor space. Our sample sizes allow you to see the true finish of our patio paint and get an idea on the colours available. DIY friendly this product is easy to apply with a brush or roller. The sample product can be tested on a patio flag prior to coating the full area.
£207.00 ex VAT.
UberSeal High Impact Plaster Finish is built for durability, offering a premium, enduring finish suitable for use over UberSeal's Renovation Plaster or a variety of other substrates.
Resincoat Factory Floor Paint Bundle gives you everything you need to create a professional resin system in a factory or industrial space of up to 100m² or 120m². You will receive our best selling HB Factory Floor Paint, primer of your choosing, anti-slip option and full accessory kit designed to make application as smooth as possible.
Offered in 10m², 20m² and 40m², our all-in-one bundle centred around our 3mm Mesh Membrane, crafted for moisture barrier applications on above-ground walls. The mesh offers a superb adhesive base for either dot and dab plasterboard application or direct rendering.
Resincoat Metallic Epoxy Design Coat is step two of the Resincoat Metallic Epoxy Flooring system, this is where your creativity can truly flourish. The Resincoat Metallic Epoxy Design Coat is supplied as a high viscosity, clear epoxy resin that you will pigment with your choice of colours to create a stunning marble or metallic effect. Simply select your colour or multiple colours below, along with the size required to create your unique design.
To complete your kit you will also need:
Resincoat Metallic Epoxy Base Coat (Step 1)
Resincoat Metallic Top Coat (Step 3)
We sell a wide variety of Metallic Powder Pigments for use in conjunction with our Metallic Design Coat, giving you full control and direction over the design of your metallic coating. Our recommendation is adding 100g of Resincoat Metallic Pigments (or one pre-measured pouch) to 5m2 of our clear Resincoat Design Coat for best results.
Resincoat stock and manufacture a wide range of exterior floor paints, interiors floor paints, line marking floor paints, anti slip floor paints and static floor paints. Only the highest quality, high strength epoxy resin and polyurethane resin are used within our products to give you the superior quality finish our customers expect from our brand. Our paint products are designed for easy application in order to minimise installation costs without the need for contractors, making our paints perfect for DIY customers and professionals alike.
Resincoat High Build Epoxy Garage Floor Paint is a two-part epoxy resin floor paint designed for garage floors. The original Resincoat formula offers a long-lasting smooth, glossy finish at the highest possible quality. This paint offers excellent resistance to foot traffic and vehicles. Ideal for both DIY/home users and industrial users alike, the floor paint can be easily applied with the surface usable again within 24 hours.
All our resin products are proudly manufactured, tested and packed by Resincoat in the UK to the highest ISO9001 standards.
Resincoat industrial factory floor paint is a heavy duty epoxy resin coating designed for use on industrial floors and highly trafficked areas. The paint is formulated to provide excellent abrasion resistance with a long lasting high build finish. Resincoat factory floor paint exhibits the highest strength whilst offering a smooth, attractive gloss finish.
Registered FeRFA member
Resincoat Anti-Slip Floor Paint is a heavy duty, epoxy resin floor coating designed as a safe flooring option for areas subject to high foot traffic such as stadiums, factories, warehouses and public event spaces. The paint is available in a range of grades from fine to coarse and is a great option for areas subject to wet conditions such as kitchens, dispatch areas and poolside's. High durability and great slip resistance make this the perfect floor paint for industrial or commercial use.
Resincoat Epoxy Resin Roller Sleeve is expertly crafted from thermo-bonded nylon & stands resilient against chemicals that typically harm roller sleeves. It's the ideal choice for projects involving solvent-based materials and 2-component paints, such as our epoxy and polyurethane resins. With precision application, exceptional durability, and compatibility with our own resin products, this versatile roller sleeve ensures professional-quality results, always.
Resincoat Damp Tolerant Epoxy Primer can be used either as a single-coat to protect against moisture when painting with subsequent resin coatings or alternatively, when two coats are applied this system can act as an effective damp proof membrane helping to prevent rising damp and other moisture contamination problems arising from concretes.
ONE COAT APPLICATION
NO PRIMER REQUIRED
Resincoat liquid rubber waterproof coating is a high quality system protecting against leaks and corrosion. Ideal for flat roof repair the liquid consistency is easy to apply. This DIY friendly coating is flexible and highly elastic boasting excellent adhesion to a wide range of substrates. Just one coat of this product can provide waterproofing for up to 10 years!
Immediate waterproofing
One coat only
No primer required
Cost effective solution
Long-lasting leak protection
You May Also Need:
Resincoat Epoxy Crack Repair Filler is an ultra strong, pourable epoxy resin liquid crack filler. It is the ideal solution to penetrate, fill and seal fine cracks in concrete, brickwork or stone surfaces. Resincoat Epoxy Crack Repair is most suitable for pourable or pressure injection crack repairs in concrete or brickwork, curing to extremely high strengths.
All-in-One Epoxy Concrete Repair Mortar from Resincoat is the ultimate patch material for concrete repair. With a finish harder than concrete and extreme long-life durablity this product is ideal for almost any repair job such as road repair or fixing pot holes. The three-part formula has been designed with the end user in mind allowing you to get the job done quickly, with a professional finish.
| Bulk Discounts - save up to 15% extra | |
| Quantity | Discount |
| 6+ | 5% |
| 16+ | 10% |
| 26+ | 15% |
| Call our office to redeem your discount on 0330 0570 695 | |
